Paper Sizes

Rolls

Rolls that meet the following conditions are supported.

• Outer diameter is 6.9 inches (175 mm) or less

• Inner diameter of paper core: 2 or 3 inches

• Printing side out

Roll Paper Width	36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
Roll paper width recommended for borderless printing(*1,*2)	36 in Roll (914.4mm) A0/A1 Roll (841.0mm) B1/B2 Roll (728.0mm) 24 in Roll (609.6mm) A1/A2 Roll (594.0mm) B2/B3 Roll (515.0mm) 17 in Roll (431.8mm) 14 in Roll (355.6mm) 10 in Roll (254.0mm)
Minimum Paper Length	Front output: 8.00 in. (203.2 mm) Top output: 8.08 in. (205.0 mm)
Maximum Printable Length	59 feet (18 m) depends on the OS and application.
Thickness	3 mil (0.07 mm) to 31 mil (0.8 mm)

• *1:Borderless printing may not be available depending on the media type. For details on media types that can be used for borderless printing, see "Paper Information List."
• *2:You can perform borderless printing without specifying Roll paper width recommended for it. As opposed to standard borderless printing, there will be a small margin on the left and right because the paper width is set a little bit smaller than the width of the document.

Sheets

Sheets of the following sizes are supported.

Sheet Width	36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
Minimum Paper Length	8.00 in. (203.2 mm)
Maximum Printable Length	24.02 in. (610.0 mm)
Thickness	3 mil (0.07 mm) to 31 mil (0.8 mm)