imagePROGRAF TX-4310/TX-3310
imagePROGRAF TX-5431/TX-5331

Highest Density Coated Paper

• Table Definition

• 
• 

Item	Description
Category	Coated Papers
Operation Panel	HD Coated Paper
Printer Driver	Highest Density Coated Paper
ICC Profile (Displayed Name)	Canon T2-Series Highest Density Coated Paper
ICC Profile (File Name)	CN_T2-Series_HighestDensityCoatedPaper.icc
Type of Black Ink	MBK
Execute Color Calibration	No
Factory Default	PRESET
Display Region	JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡)	170
Approximate Thickness (mm)	0.22
Number of Borderless Printing Sides	Four-sided Borderless
Borderless Printing	Available
Automatic Cutting	Eject cut
Leading Edge Cut Length (normal humidity)	30 mm
Leading Edge Cut Length (low/high humidity)	30 mm
Minimum Print Cut Length（normal humidity）	30 mm
Minimum Print Cut Length（low/high humidity）	30 mm

Important

• Ink will take longer to dry because this setting prints at high density.

  Note the following:

  • Allow enough time for drying.

    If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

    Change [Drying Time] settings if necessary.

    Refer to "Specifying the Ink Drying Time" for details.

  • The printer's [Cutting mode] is set to [Eject cut] by default.

    Use [Eject cut] when printing.

    If the printer's [Cutting mode] setting is changed to [Automatic cut], paper may be cut before the ink has dried sufficiently.

    Refer to "Specifying the Cutting Method for Rolls" for details.

  • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

    To prevent this from occurring, we recommend that you create a 75 mm margin at the trailing edge of the image.

  • Because ink may stain the floor or other surfaces, we recommend that you attach a basket.

    Printing without a basket may cause ink to get on the floor or other surfaces.

    Refer to "Using the Basket on the Printer Stand" for details.

    If you do not use a basket, hold the paper while it is ejected and cut it, ensuring the printed side does not touch the floor or other surfaces.

Note

• These are general-purpose paper settings.
• Borderless printing
  Depending on the paper used, borderless printing may not be available.