skip to main text

Paper is not cut straight

  1. Check 1 Is the edge of the paper cutting position creased?

    Straighten out any curling by the edges of the paper.

  2. Check 2 Is the edge of the paper cutting position lifting up when cutting?

    Reload the paper correctly.

  3. Check 3 Is the paper a type that can be cut with the cutter blade?

    Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement such as scissors.

  4. Check 4 Are you using the basket properly?

    Make sure that you are using the basket properly.

  5. Check 5 Are you using the stacker properly?

    Make sure that you are using the stacker properly.

  6. Check 6 Check that the Cut speed setting is correct.

    Tap paper settings display area on Home screen of touch screen, tap the feed slot where the paper to change is set, then tap Paper settings > Advanced and, change the setting value of Cut speed.

    If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut speed than that selected currently.

    If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut speed than that selected currently.

  7. Check 7 Did the printing material slip diagonally while being cut?

    Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has printed.

  8. Check 8 Is the cutter blade attached properly?

    Attach the cutter blade properly.

  9. Check 9 Is the edge of the cutter blade blunt?

    Replace the cutter blade.

  10. Check 10 Are you printing on Large-Format?

    Change the position of the basket.