skip to main Item

imagePROGRAF TX-4000

表の項目の説明

Settings

  • Category

    Specifies the paper category selected in [Media Type] in the printer driver.

  • Operation Panel

    Specifies the paper type selected in [Media type] on the operation panel.

  • Printer Driver

    Specifies the paper type selected in [Media Type] in the printer driver.

  • Type of Black Ink

    使用されるブラックインクの種類を記載しています。

    • BK：ブラックインク

      光沢系用紙でポスターなどを印刷する際に、高い光沢均一性を実現します。

      適性のある用紙：glossy paper,proofing paper

    • MBK：マットブラックインク

      マット系用紙で深みのある高濃度の発色が得られます。

      適性のある用紙：coated paper、matte paper、Fine Art Papers

    Note

      マットブラックインクを使用して印刷した場合、使用する用紙によっては、用紙のこすれによりインクがはがれる可能性があります。

      このインクのはがれは、以下の設定で防止できます。

      • 普通紙を使用する場合は、操作パネルとプリンタードライバーの[用紙の種類]から[普通紙(速乾)]を選択してください。
      • 普通紙以外を使用する場合は、ブラックインクの種類に「BK」のみが表記されている用紙を使用してください。
      • ブラックインクの種類に「BK」のみが表記されている用紙が無い場合は、スペシャル用紙設定を使用してください。

        • 操作パネルとプリンタードライバーの[用紙の種類]から[スペシャル1]から[スペシャル5]のいずれかを選択してください。

        詳細は「スペシャル用紙設定一覧」を参照してください。

  • Factory Default

    • Code Description
    PRESET The paper was registered to the printer at factory shipment.
    MCT The paper was not registered to the printer at factory shipment.Add the paper to the printer by using Media Configuration Tool.

  • Display Region

    With the factory default settings, the paper that is initially displayed depends on the printer destination.

    Also, when you select a region from Media Configuration Tool, the paper for that region is displayed.

    Refer to the following table for the relationships between destination code and region.

    • Code Region
    WW All regions
    JP Japan
    AS Asia
    OC Oceania
    EMEA Europe, Middle East, Africa
    AM North America, Central America, South America

    Important

    • Depending on printer destination, some paper types are not initially displayed.

Paper

  • Product Name

    The product name of the paper.

  • Company Name

    The paper distributor.

    Note

    • Paper with "Canon" written in the "Company Name" field is Canon genuine paper.
    • Paper with a name other than "Canon" written in the "Company Name" field is Canon feed confirmed paper.

      • Canon feed confirmed paper is paper that Canon has evaluated on the basis of fixed standards and confirmed feeding of the paper on this printer.However, Canon does not guarantee the product or the quality.

  • Destination

    Specifies the paper destination by using a code. Refer to the following table for the relationships between code and region.

    Important

    • This paper is not guaranteed to be sold in all regions of the target destination.
    Code Region
    WW All regions
    JP Japan
    AS Asia
    OC Oceania
    EMEA Europe, Middle East, Africa
    AM North America, Central America, South America

  • Basis Weight (typical value)

    This is the weight (g) of the paper per 1㎡.

  • Thickness (typical value)

    This is the thickness (mm) of the paper.

  • Roll Paper Size

    This is the name of the roll paper size.

  • Roll Paper Size (inch)

    This is the width (inch) of the roll paper.

  • Cut Sheet Size

    This is the name of the cut sheet size.

  • Cut Sheet Size (inch x inch)

    This is the cut sheet size (inch x inch).

Restrictions

  • Recommended Environment

    Specifies the temperature and humidity ranges where the paper can be used.

  • Number of Borderless Printing Sides

    Four-sided Borderless: Prints four borderless sides on the paper.

    Two-sided Borderless: Prints two borderless sides (left/right of transport direction) on the paper.

  • Borderless Printing

    Recommended Paper for Borderless Printing: This paper is recommended for borderless printing.

    Allowed Paper for Borderless Printing: This paper can be used for borderless printing.

    Note

    • If you execute borderless printing on paper allowed for borderless printing, the print quality may deteriorate or borders may formed as result of paper expansion.

  • Automatic Cutting

    Specifies the paper cutting method.

    Automatic Cut: Automatic Cut can be executed on paper labeled "Yes."The cutter blade automatically cuts the paper.

    Eject Cut: The cutter blade cuts the paper according to operations performed from the operation panel.

    User Cut: The cutter blade does not cut the paper.Use scissors or a similar instrument to cut the paper.

  • Roll paper auto feed

    ロール紙をセットするだけで自動的に給紙できます。

    詳細は「用紙関連の設定」を参照してください。

    Important

    • 用紙の種類とプリンターの使用条件（紙幅・温度・湿度など）によっては、この機能が使用できないことがあります。

  • 自動給紙切り替え

    ロール紙1とロール紙2を自動的に切り替えることができます。

    詳細は「ロール紙の切り替え方」を参照してください。

    Important

    • 用紙の種類とプリンターの使用条件（紙幅・温度・湿度など）によっては、この機能が使用できないことがあります。

  • Paper scrolling (outward)

    Possible: You can scroll the paper in the outward direction.

    Not possible: You cannot scroll the paper in the outward direction.

  • Paper scrolling (inward)

    Possible: You can scroll the paper in the inward direction.

    Not possible: You cannot scroll the paper in the inward direction.

  • Leading Edge Cut Length(normal humidity)/Leading Edge Cut Length(low/high humidity)

    The leading edge length of the roll paper to be cut during paper loading or four-sided borderless printing.

    If a bar code is printed on the leading edge of the roll paper, the printer removes the bar code by cutting a length of 60 mm from the leading edge, even if leading edge cut length is less than 60 mm.