Margin

Specifies the margins for HP-GL/2 data printing.

Select this setting item from Device settings > Print settings > HP-GL/2 print settings > Paper settings.

Note

• If the Leading edge margin (roll) and/or Leading edge margin (sheet) settings on Advanced paper settings are different from the settings here, the larger of the settings is given priority.

• 3mm (Initial setting)

  Specifies 3 mm margin.

  However, the trailing edge margin for cut sheet paper is 20 mm.

• 5mm

  Specifies 5 mm margin.

  However, the trailing edge margin for cut sheet paper is 20 mm.