imagePROGRAF TX-1300
imagePROGRAF TX-5130

Highest Density Coated Paper

• Table Definition

• 
• 

Item	Description
Category	Coated Papers
Operation Panel	HD Coated Paper
Printer Driver	Highest Density Coated Paper
ICC Profile (Displayed Name)	Canon T-Series Highest Density Coated Paper
ICC Profile (File Name)	CN_T-Series_HighestDensityCoatedPaper.icc
Type of Black Ink	MBK,BK
Execute Color Calibration	No
Factory Default	PRESET
Display Region	JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡)	170
Approximate Thickness (mm)	0.22

Important

• Ink will take longer to dry because this setting prints at high density.

  Note the following:

  • Allow enough time for drying.

    If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

    Change [Drying Time] settings if necessary.

    Refer to "Specifying the Ink Drying Time" for details.

  • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

    To prevent this from occurring, we recommend that you create a 75 mm margin at the trailing edge of the image.

  • Because ink may stain the floor or other surfaces, we recommend that you attach a basket.

    Printing without a basket may cause ink to get on the floor or other surfaces.

    Refer to "Using the Basket on the Printer Stand" for details.

    If you do not use a basket, hold the paper while it is ejected and cut it, ensuring the printed side does not touch the floor or other surfaces.

Note

• These are general-purpose paper settings.