skip to main text

Reducing/Enlarging Copies

You can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.

The screen below is displayed when you select Settings in the Copy standby screen and select Magnif. to select the reduction/enlargement method.

figure: Touch screen

  1. Select to display the screen below.

    figure: Touch screen

    1. Flick to specify the magnification.

    2. Specify the magnification.

      If you keep touching, the magnification is changed by 10 %.

  2. Select the magnification.

Reduction/enlargement Method

Note

  • Some of the reduction/enlargement methods are not available depending on the copy menu.

  • Fit to page

    The printer automatically reduces or enlarges the image to fit the page size.

    The setting in Magnif.: Fit to page

    Note

    • When you select Fit to page, the page size may not be detected correctly depending on the original. In this case, select the setting other than Fit to page.

  • Preset ratio

    You can select one of the preset ratios to reduce or enlarge copies.

    Select the appropriate ratio for size of original and page size.

    The setting in Magnif.: 70% A4->A5/86% A4->B5/94% A4->LTR/115% B5->A4/141% A5->A4/156% 5x7->LTR/183% 4x6->LTR

    Note

    • Some of the preset ratios are not available depending on the country or region of purchase.

  • Ratio specified copy

    You can specify the copy ratio as a percentage to reduce or enlarge copies.

Note

  • 400% MAX (maximum copy ratio) and 25% MIN (minimum copy ratio) are selectable.

  • If you make a copy at the same size as the original, select Same size.