Default Network Settings
LAN Connection Defaults
|
Item |
Default |
|---|---|
|
WLAN active/inactive |
Inactive |
|
SSID |
BJNPSETUP |
|
Wireless LAN security |
Disable |
|
IP address (IPv4) |
Auto setup |
|
IP address (IPv6) |
Auto setup |
|
Set printer name* |
XXXXXXXXXXXX |
|
Enable/disable IPv6 |
Enable |
|
Enable/disable WSD |
Enable |
|
Timeout setting |
15 minutes |
|
Enable/disable Bonjour |
Enable |
|
Service name |
Canon TS9100 series |
|
LPR protocol setting |
Enable |
|
RAW protocol |
Enable |
|
LLMNR |
Active |
|
PictBridge communication |
Enable |
|
Wired LAN DRX setting |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Wireless Direct Defaults
|
Item |
Default |
|---|---|
|
SSID (Identifier for wireless direct) |
DIRECT-abXX-TS9100series *1 |
|
Password |
YYYYYYYYYY *2 |
|
Wireless LAN security |
WPA2-PSK (AES) |
|
Wireless Direct device name |
DIRECT-abXX-TS9100series *1 |
|
Connection request confirmation |
Displayed |
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)
*2 The password is specified automatically when the printer is turned on for the first time.
