Making Copies
This section describes the basic procedure to perform standard copying.
-
Select
Copy on the HOME screen. -
Select
Standard copy.The Copy standby screen is displayed.
-
Specify settings as necessary.
-
A: Specify the page size and the media type.
-
B: Specify the number of copies.
-
C: The copy layout is displayed.
Switch the layout from
(one-sided), 
(2-on-1), 
(two-sided). -
D: Display the print setting items.
For more on the setting items:
-
-
Tap Black or Color.
The printer starts copying.
Remove the original on the platen after copying is complete.
Important-
Do not open the document cover or remove the original from the platen until scanning is completed.
-
Adding Copying Job (Reserve copy)
You can add the copying job while printing (Reserve copy).
The message is displayed when you can add the copying job.
Load the original on the platen and tap the same button (Color or Black) as the one which you previously tapped.
Note
-
When Print qlty (print quality) is set High, you cannot add the copying job.
-
If you tap Stop while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.
-
If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and try again. may appear on the touch screen. Select OK and wait a while, and then try copying again.
-
If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, select OK and tap Stop to cancel copying. After that, copy the documents that have not been finished copying.
