Default Network Settings
LAN Connection Defaults
|
Item |
Default |
|---|---|
|
Network name (SSID) |
BJNPSETUP |
|
Wi-Fi security |
Disable |
|
IP address (IPv4) |
Auto setup |
|
IP address (IPv6) |
Auto setup |
|
Set printer name* |
XXXXXXXXXXXXXXX |
|
Enable/disable IPv6 |
Enable |
|
Enable/disable WSD |
Enable |
|
Timeout settings (WSD) |
15 minutes |
|
Enable/disable Bonjour |
Enable |
|
Bonjour service name* |
Canon ModelName |
|
LPR protocol settings |
Enable |
|
RAW protocol |
Enable |
|
LLMNR |
Enable |
|
Wi-Fi DRX settings |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Wireless Direct Defaults
|
Item |
Default |
|---|---|
|
Network name (SSID) |
DIRECT-abXX-ModelName *1 *2 |
|
Password |
YYYYYYYYYY *3 |
|
Wi-Fi security |
WPA2-PSK (AES) |
|
Connection request confirmation |
Displayed |
|
2.4GHz/5GHz Switch |
2.4GHz |
*1 Default value depends on printer. To check value, use operation panel.
*2 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)
*3 The password is specified automatically when the printer is turned on for the first time.
