Copying

This section describes how to load originals and copy them to plain paper loaded in the cassette.

1. Pull out the cassette (A) from the printer.

   

2. Remove the cassette cover (B).

   

3. Slide paper guides (C) in front and (D) on right to open guides.

4. Load plain paper in portrait orientation WITH PRINT SIDE FACING DOWN.

   

5. Align paper guides (C) in front and (D) on right with paper length and width.

   

6. Mount cassette cover (B) and insert cassette into printer.

   

   After inserting the cassette into the printer, the paper setting confirmation screen for the cassette appears on the touch screen.

7. If page size on touch screen matches size of paper loaded in cassette, select Yes.

   If not, select Change to change the setting in accordance with the size of the loaded paper.

   

8. Select Copy (E) on HOME screen.

   

9. Select Standard copy.

10. Open document cover (F).

11. Load original WITH SIDE TO COPY FACING DOWN and align it with alignment mark (G).

    

12. Close the document cover.

13. Check paper settings and tap Black (H) or Color (I).

    The operation panel is opened and the paper output tray is pulled out automatically, then copying will start.

    

Important

• Do not open the document cover until copying is complete.

Note

• Your printer is equipped with many other convenient copy features.

  • Copying