skip to main text

Printing Photos from a Computer

This section describes how to print photos with Easy-PhotoPrint Editor.

  1. Open paper support (A) and pull out paper support extension (B).

  2. Open the feed slot cover (C).

  3. Slide right paper guide (D) to open both paper guides.

  4. Load photo paper in portrait orientation WITH PRINT SIDE FACING UP.

  5. Slide right paper guide (D) to align with both sides of paper stack.

  6. Close feed slot cover (C) gently.

    After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.

  7. Press the OK button.

  8. Use the left right button to select the size of the loaded paper on the rear tray, then press the OK button.

    Note

    • The (asterisk) on the LCD indicates the current setting.

  9. Use the left right button to select the type of the loaded paper on the rear tray, then press the OK button.

    Follow the instructions of any messages displayed to register the paper information.

  10. Pull out paper output tray (E) and extend paper output support (F).

    Be sure to pull out the paper output tray before printing. If not, printing will not start.

  11. Start Easy-PhotoPrint Editor.

    For Windows:

    The procedure below is for a computer running the Windows 10 operating system.

    From the Start menu, select (All apps >) Canon Utilities > Easy-PhotoPrint Editor.

    For macOS:

    From the Go menu in Finder, select Application and double-click the Canon Utilities folder, the Easy-PhotoPrint Editor folder, and then the Easy-PhotoPrint Editor icon.

  12. Click Photos icon (G).

  13. Click Browse (H) in From computer: and select folder with photos you want to print.

  14. Click photos (I) you want to print and select Open (J).

    For Windows:

    To select two or more photos at a time, click photos while pressing the Ctrl key.

    For macOS:

    To select two or more photos at a time, click photos while pressing the command key.

  15. Specify number of copies and other options under Print Settings (K).

    For Windows:

    Specify the number of copies, your model name, the paper size, and other options.

    For macOS:

    Specify the number of copies, the paper size, and other options.

    Note

    • Selecting Same No. of each photo enables you to specify the number of copies for all photos with a single setting.

    • Selecting Same No. of each photo disables the number-of-copies setting specified for each photo. When unchecked, the previous settings for each copy are re-enabled. for specifying the number of copies is also re-enabled.

  16. Start printing.

    For Windows:

    Click Print (L).

    For macOS:

    Click Next. When the Print dialog appears, specify your model name, paper, and other options, and then click Print.

Note

  • Easy-PhotoPrint Editor lets you easily create and print original collages, cards, or calendars using your favorite photos.