skip to main text

Other device settings

Select this setting item from Device settings in the menu screen which appears when you press the OK button.

  • Key repeat

    When you select ON, numbers, characters and other choices can be displayed quickly by pressing the holding the up down button when you are entering the characters etc.

  • ECO settings

  • Quiet setting

  • Original removal reminder

    Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

    Important

    • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

  • Auto retract paper output tray

    When you select ON, a screen to confirm whether to stow the output tray automatically will appear when you press the power button of the printer to turn it off.

  • Status bar settings

    Change the display of the status bar.

    • Advanced mode

      Enables or disables the status bar display.

      When Disable is selected, only the left end of the status bar will light up or flash.

    • Brightness

      Adjusts the brightness of the status bar.

  • Wi-Fi pairing settings

    These settings are used to pair and connect with a Wi-Fi compatible device.

    • Enable/disable pairing

      This setting is used to enable/disable the Wi-Fi pairing function of the printer.

    • Allow/block additional pairing

      Additional pairings with other Wi-Fi compatible devices can be allowed or blocked.

    • Delete paired devices

      Deletes all the pairing of all Wi-Fi compatible devices.