skip to main text

Setting Items for Photo Printing Using Operation Panel

You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the memory card.

Print Settings Screen

How to display the print settings screen varies with the print menu.

  • In Select photo print:

    The following screen is displayed by selecting Settings.

    figure: LCD

  • In Trimming print:

    The following screen is displayed before printing.

    figure: LCD

Setting Items

You can specify the following setting items.

Use the UPDOWN button to select a setting item and press the OK button to display the settings. Use the UPDOWN button to specify the setting and press the OK button to finalize selection.

figure: LCD

Note

  • Depending on the print menu, some setting items cannot be selected. This section describes the setting items in Select photo print.

    The setting item which cannot be selected is displayed grayed out or not displayed.

  • Some settings cannot be specified in combination with the other setting items or the print menus. If the setting which cannot be specified in combination is selected, and Error details are displayed on the LCD. In this case, select on the upper left on the LCD to check the message and change the setting.

  • The settings of the page size, media type, etc. are retained even if another print menu is selected or the printer is turned off.

  1. Page size

    Select the page size of the loaded paper.

  2. Type (Media type)

    Select the media type of the loaded paper.

  3. Print qlty (Print quality)

    Select print quality according to the photo.

  4. Border (Bordered/Borderless print)

    Select bordered or borderless print.

  5. Photo fix

    When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print.

    Note

    • As a default, photos on the memory card are printed with auto correction applied.

    • If No correction is selected, photos are printed without correction.

  6. Red-EyeCorrection

    Corrects red eyes in portraits caused by flash photography.

    Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.

  7. Print date

    Activates/deactivates to print the date (shooting date) on a photo.

    Note

    • The shooting date is printed according to the settings of Date display format in Device user settings under Device settings under Settings.