skip to main text

Checking the Ink Status with the Ink Lamps on the Operation Panel

Note

  • The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink level. If you install a used FINE cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a guide.

  • When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash to inform you of the error. Also the error code is displayed on the LCD. Check the error code and take appropriate action.

In the copy standby mode, you can check the ink status with the Color Ink lamp and Black Ink lamp.

* All the lamps on the operation panel are shown lit in the figure below for explanatory purposes.

  • A: Alarm lamp
  • B: Black Ink lamp
  • C: Color Ink lamp

Color Ink lamp or Black Ink lamp lights

The ink is running low. Prepare a new ink cartridge. The resulting print quality may not be satisfactory, if printing is continued under this condition.

Color Ink lamp or Black Ink lamp flashes, while Alarm lamp flashes

An error has occurred.

* For some types of errors, the Alarm lamp may not flash.

Note