skip to main text

Setting Items for Copying

You can change the copy settings such as the page position, color mode, and intensity.

Press the OK button and select Copy settings.

Use the up down button to set the number of copies, paper source, color mode, then press the OK button.

Use the up down button to select Others when adjusting other settings, then press the OK button.

Note

  • The setting currently specified appears in the selected state.

  • Some settings cannot be specified in combination with the setting of other setting items or the copy menu.

  • The settings of the Intensity: Auto and print quality are retained even if the printer is turned off.

  • Number of copies

    Specify the number of copies.

    Ex:

  • Paper source

    Select a paper source (rear tray/cassette) where paper is loaded.

    Ex:

  • Color mode

    Select the color mode for copying (color copy/black & white copy).

  • Others

    • Two-Sided Copying

      Select whether to perform duplex copying.

      Note

      • This item appears when A4 or Letter is selected.

    • Layout

      Select whether to copy two pages onto a single page.

      Note

      • This item appears when A4 or Letter is selected.

    • Copy intensity

      Change the intensity (brightness).

      Note

      • When you select Intensity: Auto, you cannot load the original to ADF (Auto Document Feeder).

    • Enlarge/Reduce

      Select the reduction/enlargement method.

    • Print quality

      Select the print quality according to the original.

      Note

      • The Quality: Draft can be set when the paper type is normal paper.

    • Collate

      Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.