skip to main text

Memory Reception

If the printer was not able to print the received fax, the received fax is stored in the printer's memory. The FAX Memory lamp is lit and Fax saved in memory is displayed at the Fax standby screen.

Important

  • If you unplug the power cord, all faxes stored in the printer's memory are deleted. The next time you turn the printer on, press the OK button after a confirmation screen is displayed. The list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed.

If the printer receives a fax under one of the following conditions, the received fax will be automatically stored in the printer's memory.

  • The printer is set to store received faxes in its memory:

    When Do not print is selected for Received documents in Auto print settings under Fax settings, the received faxes are stored in the printer's memory.

    You can print the faxes stored in the printer's memory from Memory reference in the Fax menu screen.

    Note

    • To print the received faxes automatically, select Print for Received documents in Auto print settings under Fax settings.

  • An error has occurred on the printer:

    If you select Print for Received documents in Auto print settings under Fax settings, a received fax will be printed automatically. However, if any of the following errors occurs, the received fax will not be printed. It will instead be stored in the printer's memory.

    When the error is resolved, the fax stored in the printer's memory is printed automatically.

    • The amount of remaining ink is insufficient to print a fax:

      Replace the FINE cartridge.

      Note

      • You can set the printer to forcibly print a received fax even if the ink has run out.

        Set Print when no ink in Auto print settings under Fax settings to Print.

        However, part or all of the fax may not be printed since the ink has run out.

        Also, the contents of the fax will not be stored in the printer's memory.

        If the ink has already run out, we recommend that Do not print be selected for Received documents in Auto print settings under Fax settings to store the received fax in the printer's memory. After you replace the FINE cartridge and select Print for Received documents in Auto print settings, the fax stored in the printer's memory will be printed automatically.

    • Paper has run out:

      Load the paper and press the OK button.

    • A different size of paper from that specified by Page size in Fax paper settings is loaded:

      Load the same size of paper as that specified by Page size in Fax paper settings, and then press the OK button.

  • You pressed the Stop button to cancel printing of a fax:

    To resume printing of the fax, display the Fax standby screen by pressing the FAX button again.

Note

  • The printer can store up to max. 50 pages* (max. 30 documents) of faxes in the printer's memory.

    * When using ITU-T No.1 chart (Standard mode)

  • If the printer's memory becomes full during memory reception, only pages which already have been received are stored in the memory. Print the received faxes stored in the printer's memory, and then delete them from the printer's memory and have the sender resend the faxes.