Copying ID Card to Fit onto Single Page

You can copy both sides of a card sized original such as an ID card onto a single sheet of paper.

1. Check that printer is turned on.

2. Load paper.

3. Press the COPY button.

   The Copy standby screen is displayed.

4. Press the Menu/Wireless connect button.

   The Copy menu screen is displayed.

5. Select Special copy, then press the OK button.

6. Select ID card copy, then press the OK button.

   If a page size setting or a media type setting that cannot be used in ID card copying is selected, the screen like shown below is displayed.

   

   1. Select a page size, then press the OK button.

   2. Select a media type, then press the OK button.

7. Use the button or the Numeric buttons to specify the number of copies.

   Change the print settings as necessary.

   • Setting Items for Copying

8. Press the Black button or the Color button.

   The screen below appears.

   

9. Place the ID card with the front side facing the platen, with 0.08 in. (2 mm) or more space between the edges (diagonally striped area (A)) of the platen, then press the OK button.

   

   When the front side has been scanned, the screen below appears.

   

10. Place the ID card with the back side facing the platen, with 0.08 in. (2 mm) or more space between the edges (diagonally striped area (A)) of the platen, then press the OK button.

    The printer starts copying.

    Remove the ID card on the platen after copying is complete.