Firmware update

Select this menu from Device settings in Setup menu.

You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Important

• When you use this function, make sure the printer is connected to the internet.

• Install update

  Performs the firmware update of the printer. Follow the on-screen instructions to perform update.

  Note

  • If the firmware update is not complete, check the following and take an appropriate action.

    • Check the network settings.

    • If Cannot connect to the server; try again is displayed on the LCD, press the OK button and try again after a while.

• Current version

  You can check the current firmware version.

• Update notification

  You can set the printer to display the firmware update information on the LCD when the firmware update is available.

  When Idle/Power off is selected, the printer informs you of the update during idle and the update information also appears when you press the ON button.

• Auto update setting

  Select ON to automatically update the firmware to the latest version.

• DNS server setup

  Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.

• Proxy server setup

  Performs settings for a proxy server. Select Use or Do not use. If you select Use, follow the display on the LCD to perform settings.