skip to main text

Firmware update

Select this setting item from Device settings in the menu screen which appears when you select (Setup) on the HOME screen.

Important

  • The administrator password may be required to change the settings.

You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Important

  • Before updating the firmware, connect the AC adapter to the printer and insert a power plug into the outlet.

  • When you use this function, make sure the printer is connected to the Internet.

Note

  • Only Check current version is available when Disable is selected for Advanced mode of Wi-Fi in LAN settings.

  • Install update

    Performs the firmware update of the printer. If you select Yes, the firmware update starts. Follow the on-screen instructions to perform update.

    Note

    • If the firmware update is not complete, check the following and take an appropriate action.

      • Check the network settings such as a wireless router.

      • If Cannot connect to the server. is displayed on the LCD, select OK and try again after a while.

  • Check current version

    You can check the current firmware version.

  • Update notification setting

    When ON is selected and the firmware update is available, the screen to inform you of the firmware update is displayed on the LCD.

  • Auto update settings

    Select ON to automatically update the firmware to the latest version.

  • DNS server setup

    Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.

  • Proxy server setup

    Performs settings for a proxy server. Follow the display on the LCD to perform settings.