imagePROGRAF TM-510M/TM-610M
imagePROGRAF TM-5510M/TM-5610M

Plain Paper (High Density)

• Table Definition

• 
• 

Item	Description
Category	Plain Papers
Operation Panel	Plain Paper (High density)
Printer Driver	Plain Paper (High Density)
Type of Black Ink	MBK
Execute Color Calibration	No
Factory Default	PRESET
Display Region	JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡)	64
Approximate Thickness (mm)	0.09

Important

• Ink will take longer to dry because this setting prints at high density.

  Note the following:

  • Allow enough time for drying.

    If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

    Change [Drying Time] settings if necessary.

    Refer to "Specifying the Ink Drying Time" for details.

  • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

    To prevent this from occurring, we recommend that you create a 75 mm margin at the trailing edge of the image.

  • Because ink may stain the floor or other surfaces, we recommend that you attach a basket.

    Printing without a basket may cause ink to get on the floor or other surfaces.

    Refer to "Using the Basket on the Printer Stand" or "Using the Desktop Basket" for details.

    If you do not use a basket, hold the paper while it is ejected and cut it, ensuring the printed side does not touch the floor or other surfaces.

Note

• These are general-purpose paper settings.