imagePROGRAF TM-510M/TM-610M
imagePROGRAF TM-5510M/TM-5610M

Highest Density Coated Paper

• Table Definition

• 
• 

Item	Description
Category	Coated Papers
Operation Panel	HD Coated Paper
Printer Driver	Highest Density Coated Paper
ICC Profile (Displayed Name)	Canon T2-Series Highest Density Coated Paper
ICC Profile (File Name)	CN_T2-Series_HighestDensityCoatedPaper.icc
Type of Black Ink	MBK
Execute Color Calibration	No
Factory Default	PRESET
Display Region	JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡)	170
Approximate Thickness (mm)	0.22
Number of Borderless Printing Sides	Four-sided Borderless
Borderless Printing	Available
Automatic Cutting	Eject cut
Leading Edge Cut Length (low/normal humidity)	30 mm
Leading Edge Cut Length (high humidity)	30 mm
Minimum Print Cut Length（low/normal humidity）	30 mm
Minimum Print Cut Length（high humidity）	30 mm

Important

• Ink will take longer to dry because this setting prints at high density.

  Note the following:

  • Allow enough time for drying.

    If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

    Change [Drying Time] settings if necessary.

    Refer to "Specifying the Ink Drying Time" for details.

  • The printer's [Cutting mode] is set to [Eject cut] by default.

    Use [Eject cut] when printing.

    If the printer's [Cutting mode] setting is changed to [Automatic cut], paper may be cut before the ink has dried sufficiently.

    Refer to "Specifying the Cutting Method for Rolls" for details.

  • There may be scratching at the leading or trailing edges of the printing surface, or paper jams may occur.

    To prevent this from occurring, we recommend that you create a 75 mm margin at the trailing edge of the image.

  • Because ink may stain the floor or other surfaces, we recommend that you attach a basket.

    Printing without a basket may cause ink to get on the floor or other surfaces.

    Refer to "Using the Basket on the Printer Stand" or "Using the Desktop Basket" for details.

    If you do not use a basket, hold the paper while it is ejected and cut it, ensuring the printed side does not touch the floor or other surfaces.

Note

• These are general-purpose paper settings.
• Borderless printing
  Depending on the paper used, borderless printing may not be available.