Menu Structure
The * on the right side of an item indicates the default value.
Values may vary depending on your model and firmware version.
-
Paper menu (when roll paper is loaded)
This menu is displayed by tapping paper information area.
Replace paper Feed/Cut Remove paper Paper settings Width Type Advanced -
Paper menu (when cut sheet is loaded)
This menu is displayed by tapping paper information area.
Replace paper Remove paper Paper settings Page size Type Advanced -
Replace paper
-
Feed/Cut
This menu is displayed when roll paper is loaded.
-
LAN settings
This menu is displayed by tapping Network icon.
Wi-Fi Connection Network name (SSID) Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wi-Fi Enable / Disable Wi-Fi setup Easy wireless connect Manual connect WPS (Push button method) Other connection types Manual connect (adv.) / WPS (PIN code method) Advanced Wireless Direct Connection Network (SSID)/device name Password Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wireless Direct Yes / No Update SSID/password Yes / No Wireless Direct device name Connection request confirmation ON* / OFF Advanced Wired LAN Connection IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wired LAN Enable / Disable Advanced Print details -
Ink information
This menu is displayed by tapping Ink icon.
Current estimated ink levels Replace Order ink now -
Setup
This menu is displayed by tapping Setup icon.
Device settings Test print Print nozzle check pattern Status print Status print (administrator) Print LAN details Print setting print Print advanced paper settings Print job history Print menu map Print color list for palettes Print settings Print head movable width setting Data width* / Maximum movable width / Paper width Prioritize paper size Enable / Disable* PDF print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Processing options Warning display Enable / Disable* JPEG print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi / 300 dpi* Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling HP-GL/2 print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Input resolution 600 dpi* / 300 dpi Print target Photo / Line drawing* Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Oversize Enable* / Disable Conserve paper ON / OFF* Rotate 0 degrees* / 90 degrees Auto rotation ON / OFF* Enlarge/Reduce Fit paper size / Same size* / Scaling Print centered ON / OFF* Cut to standard size ON / OFF* Nesting Use nesting function Enable / Disable* Nesting WaitTime 1 / 2* / ... / 98 / 99 Print cut lines Enable / Disable* Mirror ON / OFF* Line & pen manager Merge ON / OFF* Pen setup Select palette Software*/Palette A/Palette B/Factory Define palette Palette A Pen 0 to Pen 15
*Pen 0 to Pen 15 have the same menu structure.
Width 0.04mm/0.08mm/0.13mm/0.18mm
0.25mm/0.35mm/0.50mm/0.65mm
0.70mm/0.80mm/0.90mm/1.0mm
1.4mm/2.0mm/3.0mm/5.0mm
8.0mm/12.0mm
Color 0 to 255 Line attributes No setting/Circle setting Palette B Menu structure same as Palette A Factory Pen 0 to Pen 15
*Pen 0 to Pen 15 have the same menu structure.
Width Color Line attributes Reset palette All palettes/Palette A/Palette B Smooth Software* / Smoothing Thicken fine lines ON / OFF* Adjust faint lines ON / OFF* Width correction Black/gray -20 / -19 / ... / -1 / 0* / 1 / ... / 19 / 20 Color -20 / -19 / ... / -1 / 0* / 1 / ... / 19 / 20 Print color list for palettes Processing options Warning display Enable / Disable* Detect image size OFF* / Command priority / Detected size Print from USB flash settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Direct print settings from FTP Print settings 1 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 2 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 3 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 4 Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Paper settings Paper src Auto select* / Roll paper / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Default print settings Print quality settings Color mode Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP Print quality 5 (Fast) / 4 / 3* / 2 / 1 (High) Print target Photo* / Line drawing Print setting print LAN settings
The lower items of this menu are the same as the lower items of LAN settings displayed by tapping Network icon.Web service setup Web service usage registration / Web service usage cancellation Issue registration code DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Web service inquiry Print from Canon server Paper-related settings Keep media type Enable / Disable* Manage remaining roll amount Barcodes / Warning message only / Disable* Roll amount warning setting Roll amount 6 (earlier warning) / Roll amount 5 / Roll amount 4 / Roll amount 3 (standard)* / Roll amount 2 / Roll amount 1 (later warning) Detect paper setting mismatch Pause / Display warning* / Do not detect / Hold job Advanced paper settings Paper size recognition settings Roll paper setting 1 Roll paper setting 2 Roll paper setting 3 Roll paper setting 4 Roll paper setting 5 Roll paper setting 6 Roll paper setting 7 Auto feed at power on Enable* / Disable Print advanced paper settings Reset paper settings for all paper Auto maintenance settings Auto nozzle check Standard* / 1 page / 10 pages / Disable Nozzle check error display Enable / Disable* System cleaning frequency Standard* / Short Print pattern after new head ON* / OFF Hard disk settings Output method Print* / Print (auto delete) / Save to job box Save first and print ON / OFF* Common job box setting Print* / Print (auto delete) Data deletion Fast / Fast secure / Secure Monitoring service settings Enable/disable monitoring service Enable / Disable* Communication test Communication log Timing for ink level notification Standard* / Earlier notification Other device settings Energy saving settings Auto power off 5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF Sleep timer 5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min. Operation restrictions Job history Restrict / Do not restrict* Remote UI Restrict / Do not restrict* Print from USB flash drive Restrict / Do not restrict* Use USB connection Use* / Do not use Date/time setting Date settings Time setting Date display format YYYY/MM/DD / MM/DD/YYYY / DD/MM/YYYY Time zone (GMT) 0 / +1 / ... / +12 / -12 / ... / -1 Sound control Keypad sound ON/ OFF* Alarm sound ON* / OFF Length unit setting Meters* / Feet/inches EOP timer setting 1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes Job history sending setting Send / Do not send* Language selection Firmware update Install update Check current version Update notification setting Yes* / No DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Administrator password setting Remote UI or other tools / LCD, Remote UI, or other tools Maintenance Print nozzle check pattern Print head cleaning Cleaning All colors / Pattern 1 / Pattern 2 Deep cleaning All colors / Pattern 1 / Pattern 2 System cleaning All colors / Pattern 1 / Pattern 2 Print head alignment Auto (standard) Roll paper / Manual Auto (fine) Roll paper / Manual Manual Roll paper / Manual Print head angle adjustment Paper feed adjustment Set priority Roll paper Auto* / Prioritize print quality / Prioritize length accuracy Manual Auto* / Prioritize print quality / Prioritize length accuracy Adjust print quality Auto / Manual Adjust feed length Print alignment pattern Roll paper / Manual Change adjustment values -0.70% / -0.68% / ... / 0.68% / 0.70% Maintenance cartridge info Maintenance cartridge usage Replace Head replacement Replace cutter blade unit Platen cleaning Prepare to move Move on the same floor / Transport outdoors Printer information System information Current version Printer name Serial number MAC address (Wi-Fi) MAC address (wired LAN) Root cert. thumbprint (SHA-1) Root cert. thumbprint (SHA-256) Hard disk information Hard disk capacity Job box free space Error history Hardware error Recoverable error Paper feed/transfer error Usage totals Total print area Ink consumed Duty counter Head information Serial number Installation date Dot count (million dots) Head alignment performance log Values applied with auto settings Paper Thickness (Head Height) Transport unit vacuum strength Total print area -
Job management
This menu is displayed by tapping Jobs icon.
Print job List of print jobs Delete / Priority printing / Release hold
The choices vary depending on the job status.Saved job Job box list Job list Delete / Start print Print the job list Print from USB flash drive Folder/file list Settings / Start print / Preview / Copies Job history Display job history Print job history Pause printing Enable / Disable* Delete all print jobs
