skip to main text

Menu Structure

The * on the right side of an item indicates the default value.

Values may vary depending on your model and firmware version.

  • Paper menu (when roll paper is loaded)

    This menu is displayed by tapping paper information area.

    Replace paper
    Feed/Cut
    Remove paper
    Paper settings
    Width
    Type
    Advanced
  • Paper menu (when cut sheet is loaded)

    This menu is displayed by tapping paper information area.

    Replace paper
    Remove paper
    Paper settings
    Page size
    Type
    Advanced
  • Replace paper

  • Feed/Cut

    This menu is displayed when roll paper is loaded.

  • LAN settings

    This menu is displayed by tapping Network icon.

    Wi-Fi
    Connection
    Network name (SSID)
    Communication mode
    Channel
    Wi-Fi security
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    IPv6 manual address
    IPv6 manual prefix length
    IPv6 stateless address 1
    IPv6 stateless prefix length 1
    IPv6 stateless address 2
    IPv6 stateless prefix length 2
    IPv6 stateless address 3
    IPv6 stateless prefix length 3
    IPv6 stateless address 4
    IPv6 stateless prefix length 4
    DHCPv6
    DHCPv6 stateful address
    DHCPv6 stateful prefix length
    IPv6 default gateway 1
    IPv6 default gateway 2
    IPv6 default gateway 3
    IPv6 default gateway 4
    IPv6 primary DNS server address
    IPv6 secondary DNS server add.
    IPv6 DNS dyn. update: manual
    IPv6 DNS dyn. update: stateless
    IPv6 DNS dyn. update: stateful
    IPv6 Use IPv4 host/domain name
    IPv6 DNS host name
    IPv6 DNS domain name
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wi-Fi
    Enable / Disable
    Wi-Fi setup
    Easy wireless connect
    Manual connect
    WPS (Push button method)
    Other connection types
    Manual connect (adv.) / WPS (PIN code method)
    Advanced
    Wireless Direct
    Connection
    Network (SSID)/device name
    Password
    Communication mode
    Channel
    Wi-Fi security
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wireless Direct
    Yes / No
    Update SSID/password
    Yes / No
    Wireless Direct device name
    Connection request confirmation
    ON* / OFF
    Advanced
    Wired LAN
    Connection
    IPv4 address
    IPv4 subnet mask
    IPv4 default gateway
    IPv4 DNS dynamic setting
    IPv4 DNS host name
    IPv4 DNS domain name
    IPv6 link-local address
    IPv6 link-local prefix length
    IPv6 manual address
    IPv6 manual prefix length
    IPv6 stateless address 1
    IPv6 stateless prefix length 1
    IPv6 stateless address 2
    IPv6 stateless prefix length 2
    IPv6 stateless address 3
    IPv6 stateless prefix length 3
    IPv6 stateless address 4
    IPv6 stateless prefix length 4
    DHCPv6
    DHCPv6 stateful address
    DHCPv6 stateful prefix length
    IPv6 default gateway 1
    IPv6 default gateway 2
    IPv6 default gateway 3
    IPv6 default gateway 4
    IPv6 primary DNS server address
    IPv6 secondary DNS server add.
    IPv6 DNS dyn. update: manual
    IPv6 DNS dyn. update: stateless
    IPv6 DNS dyn. update: stateful
    IPv6 Use IPv4 host/domain name
    IPv6 DNS host name
    IPv6 DNS domain name
    MAC address
    IPsec settings
    Printer name
    Bonjour service name
    Settings
    Enable/disable Wired LAN
    Enable / Disable
    Advanced
    Print details
  • Ink information

    This menu is displayed by tapping Ink icon.

    Current estimated ink levels
    Replace
    Order ink now
  • Setup

    This menu is displayed by tapping Setup icon.

    Device settings
    Test print
    Print nozzle check pattern
    Status print
    Status print (administrator)
    Print LAN details
    Print setting print
    Print advanced paper settings
    Print job history
    Print menu map
    Print color list for palettes
    Print settings
    Print head movable width setting
    Data width* / Maximum movable width / Paper width
    Prioritize paper size
    Enable / Disable*
    PDF print settings
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Input resolution
    600 dpi / 300 dpi*
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Processing options
    Warning display
    Enable / Disable*
    JPEG print settings
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Input resolution
    600 dpi / 300 dpi*
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    HP-GL/2 print settings
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Input resolution
    600 dpi* / 300 dpi
    Print target
    Photo / Line drawing*
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Oversize
    Enable* / Disable
    Conserve paper
    ON / OFF*
    Rotate
    0 degrees* / 90 degrees
    Auto rotation
    ON / OFF*
    Enlarge/Reduce
    Fit paper size / Same size* / Scaling
    Print centered
    ON / OFF*
    Cut to standard size
    ON / OFF*
    Nesting
    Use nesting function
    Enable / Disable*
    Nesting WaitTime
    1 / 2* / ... / 98 / 99
    Print cut lines
    Enable / Disable*
    Mirror
    ON / OFF*
    Line & pen manager
    Merge
    ON / OFF*
    Pen setup
    Select palette
    Software*/Palette A/Palette B/Factory
    Define palette
    Palette A

    Pen 0 to Pen 15

    *Pen 0 to Pen 15 have the same menu structure.

    Here to Defaults

    Width

    0.04mm/0.08mm/0.13mm/0.18mm

    0.25mm/0.35mm/0.50mm/0.65mm

    0.70mm/0.80mm/0.90mm/1.0mm

    1.4mm/2.0mm/3.0mm/5.0mm

    8.0mm/12.0mm

    Color
    0 to 255
    Line attributes
    No setting/Circle setting
    Palette B
    Menu structure same as Palette A
    Factory

    Pen 0 to Pen 15

    *Pen 0 to Pen 15 have the same menu structure.

    Here to Defaults

    Width
    Color
    Line attributes
    Reset palette
    All palettes/Palette A/Palette B
    Smooth
    Software* / Smoothing
    Thicken fine lines
    ON / OFF*
    Adjust faint lines
    ON / OFF*
    Width correction
    Black/gray
    -20 / -19 / ... / -1 / 0* / 1 / ... / 19 / 20
    Color
    -20 / -19 / ... / -1 / 0* / 1 / ... / 19 / 20
    Print color list for palettes
    Processing options
    Warning display
    Enable / Disable*
    Detect image size
    OFF* / Command priority / Detected size
    Print from USB flash settings
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Direct print settings from FTP
    Print settings 1
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 2
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 3
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Print settings 4
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Paper settings
    Paper src
    Auto select* / Roll paper / Manual
    Margin
    3mm* / 5mm
    Border
    Borderless / Bordered*
    Rotate
    0 degrees* / 90 degrees
    Enlarge/Reduce
    Fit paper size* / Same size / Scaling
    Default print settings
    Print quality settings
    Color mode
    Color (perceptual) / Color (saturation)* / Color (correct off) / Monochrome / Monochrome BMP
    Print quality
    5 (Fast) / 4 / 3* / 2 / 1 (High)
    Print target
    Photo* / Line drawing
    Print setting print
    LAN settings
    The lower items of this menu are the same as the lower items of LAN settings displayed by tapping Network icon.
    Web service setup
    Web service usage registration / Web service usage cancellation
    Issue registration code
    DNS server setup
    Auto setup* / Manual setup
    Proxy server setup
    Use / Do not use*
    Web service inquiry
    Print from Canon server
    Paper-related settings
    Keep media type
    Enable / Disable*
    Manage remaining roll amount
    Barcodes / Warning message only / Disable*
    Roll amount warning setting
    Roll amount 6 (earlier warning) / Roll amount 5 / Roll amount 4 / Roll amount 3 (standard)* / Roll amount 2 / Roll amount 1 (later warning)
    Detect paper setting mismatch
    Pause / Display warning* / Do not detect / Hold job
    Advanced paper settings
    Paper size recognition settings
    Roll paper setting 1
    Roll paper setting 2
    Roll paper setting 3
    Roll paper setting 4
    Roll paper setting 5
    Roll paper setting 6
    Roll paper setting 7
    Auto feed at power on
    Enable* / Disable
    Print advanced paper settings
    Reset paper settings for all paper
    Auto maintenance settings
    Auto nozzle check
    Standard* / 1 page / 10 pages / Disable
    Nozzle check error display
    Enable / Disable*
    System cleaning frequency
    Standard* / Short
    Print pattern after new head
    ON* / OFF
    Hard disk settings
    Output method
    Print* / Print (auto delete) / Save to job box
    Save first and print
    ON / OFF*
    Common job box setting
    Print* / Print (auto delete)
    Data deletion
    Fast / Fast secure / Secure
    Monitoring service settings
    Enable/disable monitoring service
    Enable / Disable*
    Communication test
    Communication log
    Timing for ink level notification
    Standard* / Earlier notification
    Other device settings
    Energy saving settings
    Auto power off
    5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF
    Sleep timer
    5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min.
    Operation restrictions
    Job history
    Restrict / Do not restrict*
    Remote UI
    Restrict / Do not restrict*
    Print from USB flash drive
    Restrict / Do not restrict*
    Use USB connection
    Use* / Do not use
    Date/time setting
    Date settings
    Time setting
    Date display format
    YYYY/MM/DD / MM/DD/YYYY / DD/MM/YYYY
    Time zone (GMT)
    0 / +1 / ... / +12 / -12 / ... / -1
    Sound control
    Keypad sound
    ON/ OFF*
    Alarm sound
    ON* / OFF
    Length unit setting
    Meters* / Feet/inches
    EOP timer setting
    1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes
    Job history sending setting
    Send / Do not send*
    Language selection
    Firmware update
    Install update
    Check current version
    Update notification setting
    Yes* / No
    DNS server setup
    Auto setup* / Manual setup
    Proxy server setup
    Use / Do not use*
    Administrator password setting
    Remote UI or other tools / LCD, Remote UI, or other tools
    Maintenance
    Print nozzle check pattern
    Print head cleaning
    Cleaning
    All colors / Pattern 1 / Pattern 2
    Deep cleaning
    All colors / Pattern 1 / Pattern 2
    System cleaning
    All colors / Pattern 1 / Pattern 2
    Print head alignment
    Auto (standard)
    Roll paper / Manual
    Auto (fine)
    Roll paper / Manual
    Manual
    Roll paper / Manual
    Print head angle adjustment
    Paper feed adjustment
    Set priority
    Roll paper
    Auto* / Prioritize print quality / Prioritize length accuracy
    Manual
    Auto* / Prioritize print quality / Prioritize length accuracy
    Adjust print quality
    Auto / Manual
    Adjust feed length
    Print alignment pattern
    Roll paper / Manual
    Change adjustment values
    -0.70% / -0.68% / ... / 0.68% / 0.70%
    Maintenance cartridge info
    Maintenance cartridge usage
    Replace
    Head replacement
    Replace cutter blade unit
    Platen cleaning
    Prepare to move
    Move on the same floor / Transport outdoors
    Printer information
    System information
    Current version
    Printer name
    Serial number
    MAC address (Wi-Fi)
    MAC address (wired LAN)
    Root cert. thumbprint (SHA-1)
    Root cert. thumbprint (SHA-256)
    Hard disk information
    Hard disk capacity
    Job box free space
    Error history
    Hardware error
    Recoverable error
    Paper feed/transfer error
    Usage totals
    Total print area
    Ink consumed
    Duty counter
    Head information
    Serial number
    Installation date
    Dot count (million dots)
    Head alignment performance log
    Values applied with auto settings
    Paper Thickness (Head Height)
    Transport unit vacuum strength
    Total print area
  • Job management

    This menu is displayed by tapping Jobs icon.

    Print job
    List of print jobs
    Delete / Priority printing / Release hold
    The choices vary depending on the job status.
    Saved job
    Job box list
    Job list
    Delete / Start print
    Print the job list
    Print from USB flash drive
    Folder/file list
    Settings / Start print / Preview / Copies
    Job history
    Display job history
    Print job history
    Pause printing
    Enable / Disable*
    Delete all print jobs