Home Screen Menu Composition
After the printer starts up, the HOME screen appears on the touch screen.
From the HOME screen, you can check the printer status and select the maintenance, paper operations, settings, and other menus.
- A: Printer Information Display Area
-
Displays the printer status, messages, and other information. Select this area when a message appears to view the message on the list screen and to jump to the screen with detailed information and operations.
- B: Stop button
- Cancels print jobs in progress and ends the ink drying period.
- C: Paper Setting Display Area
- Displays information on loaded paper. Selecting this area displays the menu for making paper settings.
- D: Ink Display Area
- Displays the current estimated ink levels.Selecting this area allows you to replace ink tanks, etc.
- E: Basic Menu
- You can select functions frequently used in the paper-related menu, such as Replace paper, Feed paper, and Cut paper, directly from here.
- F: Network
-
Displays the current network status. Select to display the basic network information or to change the network settings.
The icon differs depending on the network of use or the network status.
Wi-Fi is enabled and the printer is connected to the wireless router.
Note
-
Depending on the signal state, the icon will change.
(Signal strength: 81 % or more): You can use the printer over a Wi-Fi without any problems.
(Signal strength: 51 % or more): The problem such as the printer cannot print may occur according to the network status. We recommends placing the printer near the wireless router.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur. Place the printer near the wireless router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
Wired LAN is enabled.
Wireless Direct is enabled.
Wi-Fi and Wired LAN are disabled.
-
- G: Setup
- Selects when changing the printer settings, performing maintenance, or checking printer information.
- H: Information
- Displays various printer information.
- I: Job management
- Select to make settings for managing print jobs.
Note
-
By default, menu settings apply to all print jobs. However, for settings that are also available in the printer driver, the values specified in the printer driver take priority.
Basic Touch Screen Operations
You can select various functions and settings by gently touching and swiping the touch screen with your fingertip.
Important
-
Take the following precautions when operating the touch screen. Otherwise, the touch screen may malfunction or become damaged.
- Do not forcibly press the touch screen with your finger.
- Do not press the touch screen with an object other than your finger (such as a ballpoint pen, pencil, fingernail, or other object with a sharp tip).
- Do not operate the touch screen with wet or dirty hands.
- Do not place objects on top of the touch screen.
- Do not place a protective film over the touch screen. Removing it can damage the touch screen.
Tap
Gently touch with your fingertip and then release.
Use this when selecting an item on the screen.
Touch
Gently touch with your fingertip.
To go (or return) to a menu or list, touch the directional mark.
Flick
Drag and release your finger up, down, left, or right.
Use this to quickly scroll through a menu or list.
Drag
Move your finger up, down, left, or right while gently keeping it in contact with the touch screen.
Use this to move a menu or list while viewing it.
Notification Messages
When the ink is low or there is another notification, New notice appears in the printer information display area. Select this to display the Notice list screen to view messages. Select a message to view the message details and take action.
Icons on Touch Screen
While operating on the touch screen, some icons are displayed on the touch screen.
- (HOME)
- The HOME screen appears.
- (Back)
- Displays the screen before the current screen.