Detecting Roll Paper was Replaced While the Power was Off

When you turn the printer on, it can confirm whether the roll paper was replaced while the power was off.

Set Auto feed at power on to Enable to detect the position of the roll paper's leading edge when the power is turned on. If the position of the roll paper's leading edge is over 1 mm since the last time the power was turned off, the printer determines that the roll paper has been replaced, and then starts feeding paper automatically to detect the paper width and the barcode for the management of unused roll paper.

Note

Setting Auto feed at power on to Enable causes the operations that can be done after turning on the power to take longer since the printer must detect the leading edge of the roll paper.

Select (Setup) on Home screen.
Select Printer settings.
Select Paper-related settings.
Select Auto feed at power on.
Select Enable.