skip to main text

Warning display

Displays HP-GL/2 warnings.

The display is switched when two GL/2 warnings below occur.

  • Warnings when the printer's parameter setting specification does not support the parameter settings of created HP-GL/2 data
  • HP-GL/2 warning commands when the printer does not support the created HP-GL/2 data

This setting item is displayed by tapping in the following order.

(Setup) > Device settings > Print settings > HP-GL/2 print settings > Processing options

Note

  • Warning is always displayed when one of the errors below occurs regardless of the setting.

    • When virtual GL/2 memory exceeds acceptable level
    • When GL/2 display list memory is insufficient
    • When the number of polygon vertexes which GL/2 data has exceeds acceptable level
  • Warning is always displayed on the status monitor or Remote UI regardless of the setting.
  • Enable

    Displays specific GL/2 warning on the touch screen.

  • Disable (Initial setting)

    Does not display specific GL/2 warning on the touch screen.