Other printer settings

This item is displayed when you select Printer settings from (Setup) on the HOME screen.

Important

• The administrator password is required to change the settings if it is enabled to change the settings on the operation panel using the administrator password.

• Date/time settings

  Sets the current date and time.

• Date display format

  Sets the format of dates displayed on the touch screen and printed on photos.

  Note

  • When ON is selected for Print date on the print settings screen in printing from a USB Flash Drive, the date is printed in the display format you set.

• Daylight saving time setting

  Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This setting may not be available depending on the country or region of purchase.

  • Start date/time

    Sets the date and time that summer time starts.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to start summer time will be displayed after specifying the items above and selecting OK.

    After specifying the shift time and selecting OK, you can specify the end date/time.

  • End date/time

    Sets the date and time that summer time ends.

    Month: Specify the month.

    Week: Specify the week.

    DOW: Specify the day of the week.

    The screen to set the shift time to end summer time will be displayed after specifying the items above and selecting OK.

    Specify the shift time and select OK.

• Sound control

  Selects the volume.

  • Keypad volume

    Selects the beep volume when pressing the touch screen or the buttons on the operation panel.

  • Alarm volume

    Selects the alarm volume.

• Energy saving settings

  Allows you to turn on/off the printer automatically to save electricity.

  • Auto power off

    Specifies the length of time to turn off the printer automatically when no operation is made or no printing data is sent to the printer.

  • Auto power on

    Selecting ON enables the printer to turn on automatically when printing data is sent to the printer.

  Note

  • You can also select this setting by selecting (Setup) on the HOME screen, and then selecting ECO.

    • ECO

• Time zone

  Specifies the time zone according to a country or region you live in.

  Specifying the time zone to the printer allows you to display the correct time an e-mail was sent from the main unit on your mail software.

• Original removal reminder (TC-20M only)

  Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning.

  Important

  • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected.

• Keyboard settings

  Set the keyboard.

  Select Full keyboard to select the keyboard layout from the following three types.

  • QWERTY

  • QWERTZ

  • AZERTY

• Ink level monitor

  Sets the timing of the remaining ink level notification.

• Length unit settings

  Selects the length unit (meter or feet/inch).