skip to main text

Print settings

This item is displayed when you select Printer settings from (Setup) on the HOME screen.

  • Prevent paper abrasion

    Use this setting only if the print surface becomes smudged.

    Important

    • Be sure to set this back to OFF after printing since it may result in lower print quality.

  • Adjust horizontal print position

    Adjusts the print position when the left/right margins are not aligned.

    You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and +0.12 in. (+3 mm) centered on the horizontal center of the paper.

    Important

    • When using 24 inch roll paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.

  • Cleaner Lines/Text

    When enabled, lines and text are printed more sharply.

  • IPP print settings

    Sets the image quality and paper settings for IPP printing.

    For example, when printing using AirPrint or Mopria Print Service, this setting value is applied.

  • Default print settings

    Sets the default values for print settings.

    If Media Type is set to Auto (Use Printer Settings) in the printer driver, this setting value is applied.