Removing the Roll from the Printer

Note

• If you need to cut a printed roll, cut the roll paper at the desired position.

  • Cutting Roll Paper

1. Select the paper setting display area on Home screen.

   

2. Select the Roll paper 1 area.

   

3. Select Remove paper.

4. Select Yes.

   The roll is rewound.

   Important

   • If Manage remaining roll amount is set to Barcodes in the operation panel menu, a barcode is printed on the leading edge of the roll paper.

     Do not remove the roll before the barcode is printed. You will be unable to keep track of the amount of roll paper left.

     • Keeping Track of the Amount of Roll Paper Left
     

5. Open top cover and lift output guide.

   

6. Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll.

   

7. Hold Roll Holder by its flanges (A) and remove from roll holder slot.

   

   Note

   • For instructions on removing the Roll Holder from rolls, see "Removing Rolls From the Roll Holder."

8. Lower output guide and close top cover.