imagePROGRAF PRO-6100S

Highest Density Backlit Film

• Table Definition

• 
• 

Item	Description
Category	Sign
Operation Panel	HighDensityBacklit
Printer Driver	Highest Density Backlit Film
ICC Profile (Displayed Name)	Canon PRO-6100S/561S Highest Density Backlit Film -P
ICC Profile (File Name)	CN_PRO-6100S_561S_HighestDensityBacklitFilm-P.icc
Type of Black Ink	MBK
Execute Color Calibration	No
Tone Adjustment	Not possible
Factory Default	MCT
Display Region	JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡)	165
Approximate Thickness (mm)	0.13
Number of Borderless Printing Sides	Four-sided Borderless
Borderless Printing	Available
Automatic Cutting	Eject Cut
Leading Edge Cut Length (normal humidity)	30 mm
Leading Edge Cut Length (low/high humidity)	30 mm

Important

• Ink will take longer to dry because this setting prints at high density.

  Note the following:

• Allow enough time for drying.

  If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.Change [Drying Time] settings if necessary.Refer to "Specifying the Ink Drying Time for Rolls" for details.

• The printer's [Cutting mode] is set to [Eject cut] by default.

  Use [Eject cut] when printing.If the printer's [Cutting mode] setting is changed to [Automatic cut], paper may be cut before the ink has dried sufficiently.Refer to "Specifying the Cutting Method for Rolls" for details.

• It is recommended to use the basket in Position 3.

  The ink may stick to the basket if you use it in other positions.Refer to "Printing on Large-Format or Easily Damaged Paper (Position 3)" for details.

Note

• These are general-purpose paper settings.
• If you see uneven printing in the printed material, you can alleviate the problem by aligning the backlight.
• In environments that are exposed to water, after printing the document, laminate the document or perform other appropriate processing before you use it.
• Borderless Printing
  Depending on the paper used, borderless printing may not be available.