Device user settings
Select this setting item from Device settings.
Important
- The administrator password is required to change settings if it is enabled for changing settings using the operation panel.
-
Energy saving settings
To save electricity, enable this setting to turn off the printer automatically or to enter sleep mode when specified length of time has elapsed.
-
Auto power off
Sets the time until the printer turns off automatically. If no operations are performed on the printer for the specified duration of the time after entering Sleep mode, the printer automatically turns off.
-
Sleep timer
Specifies the length of time to enter sleep mode automatically when no operation is made.
-
-
Operation restrictions
Restricts the following operations.
-
Job history
Restricts to display the print job history.
-
Remote UI
Restricts to use Remote UI.
-
Print from USB flash drive
Restricts to print data on USB flash drive.
-
-
Use USB connection
Enables/Disables USB connection.
-
Date/time setting
Sets the current date and time.
-
Date display format
Sets the format of dates displayed on the touch screen and printed on photos.
-
Time zone (GMT)
Specifies the time zone according to a country or region you live in.
Specifying the time zone allows you to display the correct time and date an e-mail was sent on your mail software.
Select the time difference from GMT (Greenwich mean time) according to a country or region you live in.
-
Length unit setting
Selects the length unit (meter or feet/inch).
-
Buzzer setting
The printer beeps once for warnings, and 3 times for errors when Enable is selected.
-
EOP timer setting
Specify the timeout period before cancellation of print jobs that cannot be received by the printer.
-
Job history sending setting
The printer sends a job history when Send is selected.