imagePROGRAF PRO-6000S
Highest Density Backlit Film
| Item | Description |
|---|---|
| Category | Sign |
| Operation Panel | HighDensityBacklit |
| Printer Driver | Highest Density Backlit Film |
| ICC Profile (Displayed Name) | Canon PRO-6000S/560S Highest Density Backlit Film -P |
| ICC Profile (File Name) | CN_PRO-6000S_560S_HighestDensityBacklitFilm-P.icc |
| Type of Black Ink | MBK |
| Execute Color Calibration | No |
| Tone Adjustment | Not possible |
| Factory Default | MCT |
| Display Region | JP,AS,OC,EMEA,AM |
| Approximate Basis Weight (g/㎡) | 165 |
| Approximate Thickness (mm) | 0.13 |
Important
- Ink will take longer to dry because this setting prints at high density.
- Allow enough time for drying.
- It is recommended to use the basket in Position 3.
Note the following:
If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.
The ink may stick to the basket if you use it in other positions.
Refer to "Printing on Large-Format or Easily Damaged Paper (Position 3)" for details.
Note
- These are general-purpose paper settings.
- If you see uneven printing in the printed material, you can alleviate the problem by aligning the backlight.
- In environments that are exposed to water, after printing the document, laminate the document or perform other appropriate processing before you use it.
