Default Network Settings
LAN Connection Defaults
|
Item |
Default |
|---|---|
|
Change LAN |
Activate wired LAN |
|
SSID |
BJNPSETUP |
|
Communication mode |
Infrastructure |
|
Wireless LAN security |
Disable |
|
IP address (IPv4) |
Auto setup |
|
IP address (IPv6) |
Auto setup |
|
Set printer name* |
XXXXXXXXXXXX |
|
Enable/disable IPv6 |
Enable |
|
Enable/disable WSD |
Disable |
|
Timeout setting |
15 minutes |
|
Enable/disable Bonjour |
Enable |
|
Service name |
Canon PRO-6000 |
|
LPR protocol setting |
Enable |
|
Wireless LAN DRX setting |
Enable |
|
Wired LAN DRX setting |
Enable |
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
Direct Connection Defaults
|
Item |
Default |
|---|---|
|
SSID (Identifier for direct connection) |
DIRECT-abXX-PRO-6000 *1 |
|
Password |
YYYYYYYYYY *2 |
|
Wireless LAN security |
WPA2-PSK (AES) |
|
Direct connection device name |
ZZZZZZ-PRO-6000 *3 |
|
Connection request confirmation |
Displayed |
*1 "ab" is specified at random and "XX" represents last two digits of printer's wireless MAC address.
*2 The password is specified automatically when the printer is turned on for the first time.
*3 "ZZZZZZ" represents last six digits of printer's wireless MAC address.
