Front

1. Top Cover
   

   Open this cover to install the print head, load paper, and remove any jammed paper from inside the printer as needed.  (See "Top Cover (Inside).")

2. Output Guide
   

   Guides printed documents as they are ejected. Open this guide when loading a roll.

3. Roll holder Slot
   

   Slide the Roll Holder into this slot.

4. Roll Holder
   

   Load the roll on this holder.

5. Holder Stopper
   

   Secure the roll on the Roll Holder with this part.

6. Release Lever
   

   To release paper retainer, lift the lever.

7. Maintenance Cartridge Cover
   

   Open this cover to replace the maintenance cartridge.

8. Maintenance Cartridge
   

   Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)

9. Stand
   

   A stand that holds the printer. Equipped with casters to facilitate moving it.  (See "Stand Parts.")

10. USB flash drive port
    

    Insert a USB flash drive to this port.

11. Touch Screen
    

    Use this screen to operate the printer and check the printer status.  (See "Operation Panel.")

12. Ink Tank Cover
    

    Open this cover to replace the ink tank.  (See "Ink Tank Cover (Inside).")