Parts of the Roll Unit

  1. Roll Holder Lock Switch

    Locks and releases the Roll Holder loaded in the roll unit.

  2. Feed Mode Lamp

    Lights up when you have selected the feed mode on the roll unit.

  3. Auto Take-up Lamp

    Lights up when the paper is being taken up.

  4. Pause Lamp

    Lights up when the paper winding is paused.

  5. Take-up Button

    You can rotate the roll unit the desired amount as long as winding is not in progress. When the winding direction is set to inward winding, the unit takes up the paper; when it is set to outward winding, the unit rewinds the paper.

  6. Rewind Button

    You can rotate the roll unit the desired amount as long as winding is not in progress. When the winding direction is set to inward winding, the unit rewinds the paper; when it is set to outward winding, the unit takes up the paper.

  7. Auto Take-up/Pause Button

    Pauses and resumes the taking up of paper.

  8. Inward/Outward Winding Changeover Switch

    Changes the winding direction when the paper is wound (inward winding and outward winding).

  9. Take-up Mode Lamp

    Lights up when you have selected the take-up mode on the roll unit.

  10. Roll Holder Slot

    Slide the Roll Holder into these guide grooves.

  11. 3-Inch Paper Core Attachment

    Attaches to the Roll Holder when you are using a roll paper with a 3-inch paper core.

  12. Feed Flap Switch

    Change the feed flap position depending on the roll unit mode.

  13. Roll Holder

    Load the roll on this holder.

  14. Holder Stopper

    This part secures the roll paper on the Roll Holder.