Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
- The network settings printout contains important information about your network. Handle it with care.
-
Load plain paper.
If you use sheets, load at least 10 sheets (A4 or Letter-sized).
-
Flick HOME screen and tap Device settings.
The menu screen appears.
-
Tap Test print.
If you specify the administrator password, enter the password.
-
Tap Print LAN details.
The printer starts printing network settings information.
Note
- You can also print the printer's network settings. Tap Device settings on the HOME screen, tap LAN settings and Confirm LAN settings in this order, and then tap Print LAN details and tap Yes.
The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)
Item
Description
Setting
LAN Setting
Basic setting information
-
Basic Info
IPv4 setting information (Wired LAN)
-
LAN Interface Mode
Current interface
Wired/Wireless/AP Mode/WFD Mode
Link Active
Operation status
Inactive/Active
IP Address
IPv4 IP address
XXX.XXX.XXX.XXX
Gateway Address
IPv4 default gateway
XXX.XXX.XXX.XXX
Subnet Mask
IPv4 subnet mask
XXX.XXX.XXX.XXX
IP Mode
Acquiring method of IPv4 IP address
Auto IP/DHCP/Manual
Use DNS Auto Mode
Acquiring DNS server automatically
On/Off
Primary DNS Server Address
Primary DNS server address
XXX.XXX.XXX.XXX
Secondary DNS Server Address
Secondary DNS server address
XXX.XXX.XXX.XXX
Control Filtering
SNMP filtering setting information
-
Use IP Filtering
Operation status of IP filtering
On/Off
IP Filtering Select
IP filtering method
Admit/Prohibit
IP Filtering Permission Address
IP filtering permission address
-
Start Address 1
Start address 1
XXX.XXX.XXX.XXX
End Address 1
End address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
Start Address 2
Start address 2
XXX.XXX.XXX.XXX
End Address 2
End address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
Start Address 3
Start address 3
XXX.XXX.XXX.XXX
End Address 3
End address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
Start Address 4
Start address 4
XXX.XXX.XXX.XXX
End Address 4
End address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
Start Address 5
Start address 5
XXX.XXX.XXX.XXX
End Address 5
End address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
IP Filtering Prohibit Address
IP filtering prohibit address
-
Start Address 1
Start address 1
XXX.XXX.XXX.XXX
End Address 1
End address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
Start Address 2
Start address 2
XXX.XXX.XXX.XXX
End Address 2
End address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
Start Address 3
Start address 3
XXX.XXX.XXX.XXX
End Address 3
End address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
Start Address 4
Start address 4
XXX.XXX.XXX.XXX
End Address 4
End address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
LAN Setting
Basic setting information
-
Basic Info
IPv4 setting information (Wired LAN)
-
Control Filtering
SNMP filtering setting information
-
IP Filtering Prohibit Address
IP filtering prohibit address
-
Start Address 5
Start address 5
XXX.XXX.XXX.XXX
End Address 5
End address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
Print Filtering
Print filtering setting information
-
Use IP Filtering
Operation status of IP filtering
On/Off
IP Filtering Select
IP filtering method
Admit/Prohibit
IP Filtering Permission Address
IP filtering permission address
-
Start Address 1
Start address 1
XXX.XXX.XXX.XXX
End Address 1
End address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
Start Address 2
Start address 2
XXX.XXX.XXX.XXX
End Address 2
End address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
Start Address 3
Start address 3
XXX.XXX.XXX.XXX
End Address 3
End address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
Start Address 4
Start address 4
XXX.XXX.XXX.XXX
End Address 4
End address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
Start Address 5
Start address 5
XXX.XXX.XXX.XXX
End Address 5
End address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
IP Filtering Prohibit Address
IP filtering prohibit address
-
Start Address 1
Start address 1
XXX.XXX.XXX.XXX
End Address 1
End address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
Start Address 2
Start address 2
XXX.XXX.XXX.XXX
End Address 2
End address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
Start Address 3
Start address 3
XXX.XXX.XXX.XXX
End Address 3
End address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
Start Address 4
Start address 4
XXX.XXX.XXX.XXX
End Address 4
End address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
Start Address 5
Start address 5
XXX.XXX.XXX.XXX
End Address 5
End address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
LAN Setting
Basic setting information
-
IPv6 Info
IPv6 setting information (Wired LAN)
-
Link Local Address
Link local address
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIP Address
IPv6 IP address
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length
Link local address prefix length
XXX (0 to 128)
Use Manual Mode
Operation status of IPv6 manual address
On/Off
Manual Address
Manual address
-
IP Address
IPv6 IP address
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length
Prefix length
XXX (0 to 128)
Use Stateful Address Mode
Operation status of stateful address mode
On/Off
Stateful Address
Stateful address
-
IP Address
IPv6 IP address
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length
Prefix length
XXX (0 to 128)
Stateless Address
Stateless address
-
IP Address 1
IP address 1
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 1
Prefix length 1
XXX (0 to 128)
IP Address 2
IP address 2
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 2
Prefix length 2
XXX (0 to 128)
IP Address 3
IP address 3
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 3
Prefix length 3
XXX (0 to 128)
IP Address 4
IP address 4
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 4
Prefix length 4
XXX (0 to 128)
Gateway Address
Gateway address
-
IP Address 1
IP address 1
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 1
Prefix length 1
XXX (0 to 128)
IP Address 2
IP address 2
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 2
Prefix length 2
XXX (0 to 128)
IP Address 3
IP address 3
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 3
Prefix length 3
XXX (0 to 128)
IP Address 4
IP address 4
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXPrefix Length 4
Prefix length 4
XXX (0 to 128)
Use DNS Auto Mode
Acquiring DNS server automatically
On/Off
Primary DNS Server Address
Primary DNS server address
XXX.XXX.XXX.XXX
Secondary DNS Server Address
Secondary DNS server address
XXX.XXX.XXX.XXX
Control Filtering
SNMP filtering setting information
-
Use IP Filtering
Operation status of IP filtering
On/Off
IP Filtering Select
IP filtering method
Admit/Prohibit
IPv6 Filtering Permission Info
IPv6 filtering permission information
-
IP Filtering Start Address 1
IP filtering start address 1
XXX.XXX.XXX.XXX
IP Filtering End Address 1
IP filtering end address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
LAN Setting
Basic setting information
-
IPv6 Info
IPv6 setting information (Wired LAN)
-
Control Filtering
SNMP filtering setting information
-
IP Filtering Start Address 2
IP filtering start address 2
XXX.XXX.XXX.XXX
IP Filtering End Address 2
IP filtering end address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
IP Filtering Start Address 3
IP filtering start address 3
XXX.XXX.XXX.XXX
IP Filtering End Address 3
IP filtering end address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
IP Filtering Start Address 4
IP filtering start address 4
XXX.XXX.XXX.XXX
IP Filtering End Address 4
IP filtering end address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
IP Filtering Start Address 5
IP filtering start address 5
XXX.XXX.XXX.XXX
IP Filtering End Address 5
IP filtering end address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
IPv6 Filtering Prohibit Info
IPv6 Filtering prohibit information
-
IP Filtering Start Address 1
IP filtering start address 1
XXX.XXX.XXX.XXX
IP Filtering End Address 1
IP filtering end address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
IP Filtering Start Address 2
IP filtering start address 2
XXX.XXX.XXX.XXX
IP Filtering End Address 2
IP filtering end address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
IP Filtering Start Address 3
IP filtering start address 3
XXX.XXX.XXX.XXX
IP Filtering End Address 3
IP filtering end address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
IP Filtering Start Address 4
IP filtering start address 4
XXX.XXX.XXX.XXX
IP Filtering End Address 4
IP filtering end address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
IP Filtering Start Address 5
IP filtering start address 5
XXX.XXX.XXX.XXX
IP Filtering End Address 5
IP filtering end address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
Print Filtering
Print filtering setting information
-
Use IP Filtering
Operation status of IP filtering
On/Off
IP Filtering Select
IP filtering method
Admit/Prohibit
IP Filtering Permission Info
IP filtering permission information
-
IP Filtering Start Address 1
IP filtering start address 1
XXX.XXX.XXX.XXX
IP Filtering End Address 1
IP filtering end address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
IP Filtering Start Address 2
IP filtering start address 2
XXX.XXX.XXX.XXX
IP Filtering End Address 2
IP filtering end address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
LAN Setting
Basic setting information
-
IPv6 Info
IPv6 setting information (Wired LAN)
-
Print Filtering
Print filtering setting information
-
IP Filtering Start Address 3
IP filtering start address 3
XXX.XXX.XXX.XXX
IP Filtering End Address 3
IP filtering end address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
IP Filtering Start Address 4
IP filtering start address 4
XXX.XXX.XXX.XXX
IP Filtering End Address 4
IP filtering end address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
IP Filtering Start Address 5
IP filtering start address 5
XXX.XXX.XXX.XXX
IP Filtering End Address 5
IP filtering end address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
IPv6 Filtering Prohibit Info
IPv6 Filtering prohibit information
-
IP Filtering Start Address 1
IP filtering start address 1
XXX.XXX.XXX.XXX
IP Filtering End Address 1
IP filtering end address 1
XXX.XXX.XXX.XXX
Use Single On 1
Use single on 1
On/Off
IP Filtering Start Address 2
IP filtering start address 2
XXX.XXX.XXX.XXX
IP Filtering End Address 2
IP filtering end address 2
XXX.XXX.XXX.XXX
Use Single On 2
Use single on 2
On/Off
IP Filtering Start Address 3
IP filtering start address 3
XXX.XXX.XXX.XXX
IP Filtering End Address 3
IP filtering end address 3
XXX.XXX.XXX.XXX
Use Single On 3
Use single on 3
On/Off
IP Filtering Start Address 4
IP filtering start address 4
XXX.XXX.XXX.XXX
IP Filtering End Address 4
IP filtering end address 4
XXX.XXX.XXX.XXX
Use Single On 4
Use single on 4
On/Off
IP Filtering Start Address 5
IP filtering start address 5
XXX.XXX.XXX.XXX
IP Filtering End Address 5
IP filtering end address 5
XXX.XXX.XXX.XXX
Use Single On 5
Use single on 5
On/Off
MAC Info
MAC address setting information (Wired/Wireless LAN)
-
MAC Address(Wired)
MAC address (Wired LAN)
XX:XX:XX:XX:XX:XX
MAC Address(Wireless)
MAC address (Wireless LAN)
XX:XX:XX:XX:XX:XX
Use MAC Address Filtering
Operation status of MAC address filtering
On/Off
MAC Filtering Select
MAC address filtering method
Admit/Prohibit
MAC Filtering Permission Info
MAC filtering permission information
-
MAC Address 1
MAC address 1
XX:XX:XX:XX:XX:XX
MAC Address 2
MAC address 2
XX:XX:XX:XX:XX:XX
MAC Address 3
MAC address 3
XX:XX:XX:XX:XX:XX
MAC Address 4
MAC address 4
XX:XX:XX:XX:XX:XX
MAC Address 5
MAC address 5
XX:XX:XX:XX:XX:XX
LAN Setting
Basic setting information
-
MAC Info
MAC address setting information (Wired/Wireless LAN)
-
MAC Filtering Prohibit Info
MAC filtering prohibit information
-
MAC Address 1
MAC address 1
XX:XX:XX:XX:XX:XX
MAC Address 2
MAC address 2
XX:XX:XX:XX:XX:XX
MAC Address 3
MAC address 3
XX:XX:XX:XX:XX:XX
MAC Address 4
MAC address 4
XX:XX:XX:XX:XX:XX
MAC Address 5
MAC address 5
XX:XX:XX:XX:XX:XX
Proxy Setting
Proxy server setting information
-
Use Proxy
Use proxy server
On/Off
Proxy Server Address
Proxy server address
XXXXXXXXXXXXXXXX (up to 128 characters)
Proxy Port Number
Proxy port specification
1 to 65535
Use User Authority Mode
Use user authority mode
On/Off
Proxy Server User Name
Proxy server user name
XXXXXXXXXXXXXXXX (up to 64 characters)
Proxy Server Password
Proxy server password
XXXXXXXXXXXXXXXX (up to 64 characters)
Wireless LAN Setting
Wireless LAN setting information
-
Channel
Channel (infrastructure)
XXX (0 to 255)
SSID
SSID
Wireless LAN (infrastructure) SSID (up to 32 characters)
Security Type
Security type for Wireless LAN (infrastructure)
Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED
WEP1
WEP key 1 for Wireless LAN (infrastructure)
XXXXXXXX (up to 32 characters)
WEP2
WEP key 2 for Wireless LAN (infrastructure)
XXXXXXXX (up to 32 characters)
WEP3
WEP key 3 for Wireless LAN (infrastructure)
XXXXXXXX (up to 32 characters)
WEP4
WEP key 4 for Wireless LAN (infrastructure)
XXXXXXXX (up to 32 characters)
WEP Certificate
WEP certificate for Wireless LAN (infrastructure)
Open/Shared/Auto
WEP Format
WEP format for Wireless LAN (infrastructure)
Hex/String
WPA PSK
Passphrase for Wireless LAN (infrastructure)
XXXXXXXX (up to 64 characters)
P2P LAN Setting
P2P LAN setting information
-
Channel
Channel (P2P)
XXX (0 to 255)
SSID
SSID
Wireless LAN SSID (P2P)
Security Type
Security type for Wireless LAN (P2P) (up to 32 characters)
Disabled/WPA2 PSK TKIP/WPA2 PSK AES
WPA PSK
Passphrase for Wireless LAN (P2P)
XXXXXXXXXX (up to 10 characters)
WFD LAN Setting
WFD LAN setting information
-
Device Name
Device name
XXXXXXXX (up to 32 characters)
Channel
Channel (WFD)
XXX (0 to 255)
SSID
SSID
Wireless LAN SSID (WFD) (up to 32 characters)
Security Type
Security type for Wireless LAN (P2P)
Disabled/WPA2 PSK TKIP/WPA2 PSK AES
WPA PSK
Passphrase for Wireless LAN (P2P)
XXXXXXXXXX (up to 10 characters)
Use Notify Connection
Use notify connection
On/Off
Protocol Setting
Protocol setting information
-
Printer Name
Printer name
XXXXXXXX (up to 16 characters)
Use LPR
Use LPR
On/Off
Printer Location
Printer location
XXXXXXXX (up to 16 characters)
Use Wired Power Save
Discontinuous reception (Wired LAN)
On/Off
Use Wireless Power Save
Discontinuous reception (Wireless LAN)
On/Off
Use RAW
Use RAW
On/Off
Use LLMNR
Use LLMNR
On/Off
Use Spanning Tree
Use spanning tree
On/Off
WSD Setting
WSD setting information
-
Use WSD
Use WSD
On/Off
WSD Timeout
Timeout
1/5/10/15/20 [min]
Use WSD Push Scan
Use WSD push scan
On/Off
Use WSD Rx Optimization
Use WSD reception optimization
On/Off
SNMP Setting
SNMP setting information
-
Use SNMPv1
Use SNMPv1
On/Off
Use SNMPv3
Use SNMPv3
On/Off
SNMP Community Name1
SNMP community name 1
XXXXXXXX (up to 32 characters)
SNMP Community Name2
SNMP community name 2
XXXXXXXX (up to 32 characters)
SNMP Extra Access Authority
SNMP extra access authority
Read Only/Read Write
SNMP Access Authority1
SNMP access authority 1
Read Only/Read Write
SNMP Access Authority2
SNMP access authority 2
Read Only/Read Write
SNMPV3 Setting
SNMPV3 setting information
-
User1
User 1
-
User Name
User name
XXXXXXXX (up to 32 characters)
Use SNMPv3
Use SNMPv3
On/Off
MIB Access Restriction
MIB access restriction
Read Only/Read Write
Security Setting
Security setting
No Auth No Encrypt/Auth No Encrypt/Auto Encrypt
Authority Algorithm
Authority algorithm
None/MD5/SHA1
Authority Password
Authority password
XXXXXXXX (0 to 16 characters)
Encryption Algorithm
Encryption algorithm
None/AES/DES
Encryption Password
Encryption password
XXXXXXXX (0 to 16 characters)
User2
User 2
-
User Name
User name
XXXXXXXX (up to 32 characters)
Use SNMPv3
Use SNMPv3
On/Off
MIB Access Restriction
MIB access restriction
Read Only/Read Write
Security Setting
Security setting
No Auth No Encrypt/Auth No Encrypt/Auto Encrypt
Authority Algorithm
Authority algorithm
None/MD5/SHA1
Authority Password
Authority password
XXXXXXXX (0 to 16 characters)
Encryption Algorithm
Encryption algorithm
None/AES/DES
Encryption Password
Encryption password
XXXXXXXX (0 to 16 characters)
SNMPV3 Setting
SNMPV3 setting information
-
User3
User 3
-
User Name
User name
XXXXXXXX (up to 32 characters)
Use SNMPv3
Use SNMPv3
On/Off
MIB Access Restriction
MIB access restriction
Read Only/Read Write
Security Setting
Security setting
No Auth No Encrypt/Auth No Encrypt/Auto Encrypt
Authority Algorithm
Authority algorithm
None/MD5/SHA1
Authority Password
Authority password
XXXXXXXX (0 to 16 characters)
Encryption Algorithm
Encryption algorithm
None/AES/DES
Encryption Password
Encryption password
XXXXXXXX (0 to 16 characters)
User4
User 4
-
User Name
User name
XXXXXXXX (up to 32 characters)
Use SNMPv3
Use SNMPv3
On/Off
MIB Access Restriction
MIB access restriction
Read Only/Read Write
Security Setting
Security setting
No Auth No Encrypt/Auth No Encrypt/Auto Encrypt
Authority Algorithm
Authority algorithm
None/MD5/SHA1
Authority Password
Authority password
XXXXXXXX (0 to 16 characters)
Encryption Algorithm
Encryption algorithm
None/AES/DES
Encryption Password
Encryption password
XXXXXXXX (0 to 16 characters)
User5
User 5
-
User Name
User name
XXXXXXXX (up to 32 characters)
Use SNMPv3
Use SNMPv3
On/Off
MIB Access Restriction
MIB access restriction
Read Only/Read Write
Security Setting
Security setting
No Auth No Encrypt/Auth No Encrypt/Auto Encrypt
Authority Algorithm
Authority algorithm
None/MD5/SHA1
Authority Password
Authority password
XXXXXXXX (0 to 16 characters)
Encryption Algorithm
Encryption algorithm
None/AES/DES
Encryption Password
Encryption password
XXXXXXXX (0 to 16 characters)
SNTP Setting
SNTP setting information
-
Use SNTP
Use SNTP
On/Off
SNTP Polling Interval
SNTP polling interval
1 to 48 [sec]
SNTP Server Name
SNTP server name
XXXXXXXX (up to 256 characters)
FTP Setting
FTP setting information
-
Use FTP
Use FTP
On/Off
Use FTP Authority
Use FTP authority
On/Off
FTP User Name
FTP user name
XXXXXXXX (up to 33 characters)
FTP Password
FTP password
XXXXXXXX (up to 33 characters)
Bonjour Setting
Bonjour setting information
-
Use Bonjour
Use Bonjour
On/Off
Bonjour Service Name
Bonjour service name
Bonjour service name (Up to 50 alphanumeric characters)
802.1X Setting
802.1X setting information
-
Authority State
802.1X authority state
Invalid/Authorized
Authority Type
Enable/disable 802.1X and authority type
Off/On/EAP-TTLS
EAP TTLS Type
Internal authority type for EAP-TTLS
Invalid/Authorized
Weak Encryption Restriction
Weak encryption restriction
Invalid/Authorized
Weak Certificate Restriction
Weak certificate restriction
Invalid/Authorized
Login Name
Login name
XXXXXXXX (up to 24 characters)
User Name
User name
XXXXXXXX (up to 24 characters)
Password
Password
XXXXXXXX (up to 24 characters)
Server Name
Server name
XXXXXXXX (up to 43 characters)
IPsec Setting
IPsec setting information
-
Use IPsec
Use IPsec
On/Off
Previous Shared Key
Previous shared key for IPsec
XXXXXXXX (up to 17 characters)
Phase2 Protocol
IPsec phase2 protocol
AH/ESP/AH+ESP
AAP Location Info
AAP location information
-
Height
Height
0 to 65535
Latitude Info
Latitude information
-
Direction
Direction
South Latitude/North Latitude
Time
Time
0 to 90
Minute
Minute
0 to 59
Sec1
Sec 1
0 to 59
Sec2
Sec 2
0 to 999
Longitude Info
Longitude information
-
Direction
Direction
South Latitude/North Latitude
Time
Time
0 to 90
Minute
Minute
0 to 59
Sec1
Sec 1
0 to 59
Sec2
Sec 2
0 to 999
Email Setting
E-mail setting information
-
Retry Count
E-mail retry count
0 to 5
Retry Interval
E-mail retry interval
1 to 60 (min)
Use Email Notification
Use E-mail notification
On/Off
Use SSL
Use SSL
On/Off
Use SSL Cert No Check
Use SSL certification
On/Off
Use Mailbox Delete
Use mailbox delete
On/Off
Email Setting
E-mail setting information
-
SMTP Server Address
SMTP server address
XXXXXXXX (up to 64 characters)
SMTP Server Port No
SMTP server port number
1 to 65535
SMTP State
SMTP state
Invalid/Authorized/POP before SMTP
From Address 1
From address 1
XXXXXXXX (up to 128 characters)
To Address 1
To address 1
XXXXXXXX (up to 128 characters)
Reply Address 1
Reply address 1
XXXXXXXX (up to 128 characters)
Notice Conditions 1
Notice conditions 1
-
Job End
Job end
On/Off
Error Occurred
Error occurred
On/Off
Warning Occurred
Warning occurred
On/Off
Signature 1
Signature 1
XXXXXXXX (up to 128 characters)
To Address 2
To address 2
XXXXXXXX (up to 128 characters)
Reply Address 2
Reply address 2
XXXXXXXX (up to 128 characters)
Notice Conditions 2
Notice conditions 2
-
Job End
Job end
On/Off
Error Occurred
Error occurred
On/Off
Warning Occurred
Warning occurred
On/Off
Signature 2
Signature 2
XXXXXXXX (up to 128 characters)
RUI Setting
RUI setting information
-
Use RUI
Use Remote UI
On/Off
Language
Language
-
("XX" represents alphanumeric characters.)