Parts of the Roll Unit

1. Roll Holder Lock Switch
   

   Locks and releases the Roll Holder loaded in the roll unit.

2. Feed Mode Lamp
   

   Lights up when you have selected the feed mode on the roll unit.

3. Auto Take-up Lamp
   

   Lights up when the paper is being taken up.

4. Pause Lamp
   

   Lights up when the paper winding is paused.

5. Take-up Button
   

   You can rotate the roll unit the desired amount as long as winding is not in progress. When the winding direction is set to inward winding, the unit takes up the paper; when it is set to outward winding, the unit rewinds the paper.

6. Rewind Button
   

   You can rotate the roll unit the desired amount as long as winding is not in progress. When the winding direction is set to inward winding, the unit rewinds the paper; when it is set to outward winding, the unit takes up the paper.

7. Auto Take-up/Pause Button
   

   Pauses and resumes the taking up of paper.

8. Inward/Outward Winding Changeover Switch
   

   Changes the winding direction when the paper is wound (inward winding and outward winding).

9. Take-up Mode Lamp
   

   Lights up when you have selected the take-up mode on the roll unit.

10. Roll Holder Slot
    

    Slide the Roll Holder into these guide grooves.

11. 3-Inch Paper Core Attachment
    

    Attaches to the Roll Holder when you are using a roll paper with a 3-inch paper core.

12. Feed Flap Switch
    

    Change the feed flap position depending on the roll unit mode.

13. Roll Holder
    

    Load the roll on this holder.

14. Holder Stopper
    

    This part secures the roll paper on the Roll Holder.