打印网络设置
使用操作面板打印打印机的当前网络设置。
重要事项
- 此网络设置打印输出包含关于网络的重要信息。 请小心处理。
-
装入普通纸。
如果使用单页纸,请至少准备11张(A4或Letter尺寸)。
-
在主页屏幕上选择设备设置。
-
选择LAN设置。
-
选择打印详细信息。
-
在显示的屏幕上选择是。
-
在显示的屏幕上选择是或否。
打印机开始打印网络设置信息。
注释
- 也可以打印打印机的网络设置。 选择设备设置 > 测试打印 > 打印LAN详细信息 > 是 > 是。
打印的网络设置信息如下: (根据打印机设置,某些设置值不会显示。)
项目 |
描述 |
设置 |
---|---|---|
LAN Setting |
基本设置信息 |
- |
Basic Info |
IPv4设置信息(有线LAN) |
- |
LAN Interface Mode |
当前接口 |
Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Direct connection)/Disabled |
Link Active |
操作状态 |
Active/Inactive |
Gigabit Ethernet Settings |
使用千兆以太网时的通讯速度和通讯方法 |
Auto/10M half duplex/10M full duplex/100M half duplex/100M full duplex/1G full duplex |
IP Address |
IPv4 IP地址 |
XXX.XXX.XXX.XXX |
Gateway Address |
IPv4默认网关 |
XXX.XXX.XXX.XXX |
Subnet Mask |
IPv4子网掩码 |
XXX.XXX.XXX.XXX |
IP Mode |
获取IPv4 IP地址的方法 |
Auto IP/DHCP/Manual |
Use DNS Auto Mode |
自动获取DNS服务器 |
On/Off |
Primary DNS Server Address |
主DNS服务器地址 |
XXX.XXX.XXX.XXX |
Secondary DNS Server Address |
辅助DNS服务器地址 |
XXX.XXX.XXX.XXX |
Control Filtering |
SNMP筛选设置信息 |
- |
Use IP Filtering |
IP筛选的操作状态 |
On/Off |
IP Filtering Select |
IP筛选方法 |
Disabled/Enabled |
IP Filtering Permission Address |
IP筛选许可地址 |
- |
Start Address 1 |
起始地址1 |
XXX.XXX.XXX.XXX |
End Address 1 |
结束地址1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
Start Address 2 |
起始地址2 |
XXX.XXX.XXX.XXX |
End Address 2 |
结束地址2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
Start Address 3 |
起始地址3 |
XXX.XXX.XXX.XXX |
End Address 3 |
结束地址3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
Start Address 4 |
起始地址4 |
XXX.XXX.XXX.XXX |
End Address 4 |
结束地址4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
Start Address 5 |
起始地址5 |
XXX.XXX.XXX.XXX |
End Address 5 |
结束地址5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
IP Filtering Prohibit Address |
IP筛选禁止地址 |
- |
Start Address 1 |
起始地址1 |
XXX.XXX.XXX.XXX |
End Address 1 |
结束地址1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
Start Address 2 |
起始地址2 |
XXX.XXX.XXX.XXX |
End Address 2 |
结束地址2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
Start Address 3 |
起始地址3 |
XXX.XXX.XXX.XXX |
End Address 3 |
结束地址3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
Start Address 4 |
起始地址4 |
XXX.XXX.XXX.XXX |
End Address 4 |
结束地址4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
LAN Setting |
基本设置信息 |
- |
Basic Info |
IPv4设置信息(有线LAN) |
- |
Control Filtering |
SNMP筛选设置信息 |
- |
IP Filtering Prohibit Address |
IP筛选禁止地址 |
- |
Start Address 5 |
起始地址5 |
XXX.XXX.XXX.XXX |
End Address 5 |
结束地址5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
Print Filtering |
打印筛选设置信息 |
- |
Use IP Filtering |
IP筛选的操作状态 |
On/Off |
IP Filtering Select |
IP筛选方法 |
Disabled/Enabled |
IP Filtering Permission Address |
IP筛选许可地址 |
- |
Start Address 1 |
起始地址1 |
XXX.XXX.XXX.XXX |
End Address 1 |
结束地址1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
Start Address 2 |
起始地址2 |
XXX.XXX.XXX.XXX |
End Address 2 |
结束地址2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
Start Address 3 |
起始地址3 |
XXX.XXX.XXX.XXX |
End Address 3 |
结束地址3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
Start Address 4 |
起始地址4 |
XXX.XXX.XXX.XXX |
End Address 4 |
结束地址4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
Start Address 5 |
起始地址5 |
XXX.XXX.XXX.XXX |
End Address 5 |
结束地址5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
IP Filtering Prohibit Address |
IP筛选禁止地址 |
- |
Start Address 1 |
起始地址1 |
XXX.XXX.XXX.XXX |
End Address 1 |
结束地址1 |
XXX.XXX.XXX.XXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
Start Address 2 |
起始地址2 |
XXX.XXX.XXX.XXX |
End Address 2 |
结束地址2 |
XXX.XXX.XXX.XXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
Start Address 3 |
起始地址3 |
XXX.XXX.XXX.XXX |
End Address 3 |
结束地址3 |
XXX.XXX.XXX.XXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
Start Address 4 |
起始地址4 |
XXX.XXX.XXX.XXX |
End Address 4 |
结束地址4 |
XXX.XXX.XXX.XXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
Start Address 5 |
起始地址5 |
XXX.XXX.XXX.XXX |
End Address 5 |
结束地址5 |
XXX.XXX.XXX.XXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
LAN Setting |
基本设置信息 |
- |
IPv6 Info |
IPv6设置信息(有线LAN) |
- |
Link Local Address |
本地链路地址 |
- |
IP Address |
IPv6 IP地址 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
链路本地地址前缀长度 |
XXX(0到128) |
Use Manual Mode |
IPv6手动地址的操作状态 |
On/Off |
Manual Address |
手动地址 |
- |
IP Address |
IPv6 IP地址 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
前缀长度 |
XXX(0到128) |
Use Stateful Address Mode |
有状态地址模式下的操作状态 |
On/Off |
Stateful Address |
有状态地址 |
- |
IP Address |
IPv6 IP地址 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length |
前缀长度 |
XXX(0到128) |
Stateless Address |
无状态地址 |
- |
IP Address 1 |
IP地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 1 |
前缀长度1 |
XXX(0到128) |
IP Address 2 |
IP地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 2 |
前缀长度2 |
XXX(0到128) |
IP Address 3 |
IP地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 3 |
前缀长度3 |
XXX(0到128) |
IP Address 4 |
IP地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 4 |
前缀长度4 |
XXX(0到128) |
Gateway Address |
网关地址 |
- |
IP Address 1 |
IP地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 1 |
前缀长度1 |
XXX(0到128) |
IP Address 2 |
IP地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 2 |
前缀长度2 |
XXX(0到128) |
IP Address 3 |
IP地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 3 |
前缀长度3 |
XXX(0到128) |
IP Address 4 |
IP地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Prefix Length 4 |
前缀长度4 |
XXX(0到128) |
Use DNS Auto Mode |
自动获取DNS服务器 |
On/Off |
Primary DNS Server Address |
主DNS服务器地址 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Secondary DNS Server Address |
辅助DNS服务器地址 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Control Filtering |
SNMP筛选设置信息 |
- |
Use IP Filtering |
IP筛选的操作状态 |
On/Off |
IP Filtering Select |
IP筛选方法 |
Disabled/Enabled |
IPv6 Filtering Permission Info |
IPv6筛选许可信息 |
- |
IP Filtering Start Address 1 |
IP筛选起始地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP筛选结束地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
LAN Setting |
基本设置信息 |
- |
IPv6 Info |
IPv6设置信息(有线LAN) |
- |
Control Filtering |
SNMP筛选设置信息 |
- |
IP Filtering Start Address 2 |
IP筛选起始地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP筛选结束地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
IP Filtering Start Address 3 |
IP筛选起始地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP筛选结束地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
IP Filtering Start Address 4 |
IP筛选起始地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP筛选结束地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
IP Filtering Start Address 5 |
IP筛选起始地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP筛选结束地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
IPv6 Filtering Prohibit Info |
IPv6筛选禁止信息 |
- |
IP Filtering Start Address 1 |
IP筛选起始地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP筛选结束地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
IP Filtering Start Address 2 |
IP筛选起始地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP筛选结束地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
IP Filtering Start Address 3 |
IP筛选起始地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP筛选结束地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
IP Filtering Start Address 4 |
IP筛选起始地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP筛选结束地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
IP Filtering Start Address 5 |
IP筛选起始地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP筛选结束地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
Print Filtering |
打印筛选设置信息 |
- |
Use IP Filtering |
IP筛选的操作状态 |
On/Off |
IP Filtering Select |
IP筛选方法 |
Disabled/Enabled |
IP Filtering Permission Info |
IP筛选许可信息 |
- |
IP Filtering Start Address 1 |
IP筛选起始地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP筛选结束地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
IP Filtering Start Address 2 |
IP筛选起始地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP筛选结束地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
LAN Setting |
基本设置信息 |
- |
IPv6 Info |
IPv6设置信息(有线LAN) |
- |
Print Filtering |
打印筛选设置信息 |
- |
IP Filtering Start Address 3 |
IP筛选起始地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP筛选结束地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
IP Filtering Start Address 4 |
IP筛选起始地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP筛选结束地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
IP Filtering Start Address 5 |
IP筛选起始地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP筛选结束地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
IPv6 Filtering Prohibit Info |
IPv6筛选禁止信息 |
- |
IP Filtering Start Address 1 |
IP筛选起始地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 1 |
IP筛选结束地址1 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 1 |
使用单个地址1 |
On/Off |
IP Filtering Start Address 2 |
IP筛选起始地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 2 |
IP筛选结束地址2 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 2 |
使用单个地址2 |
On/Off |
IP Filtering Start Address 3 |
IP筛选起始地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 3 |
IP筛选结束地址3 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 3 |
使用单个地址3 |
On/Off |
IP Filtering Start Address 4 |
IP筛选起始地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 4 |
IP筛选结束地址4 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 4 |
使用单个地址4 |
On/Off |
IP Filtering Start Address 5 |
IP筛选起始地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IP Filtering End Address 5 |
IP筛选结束地址5 |
XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Use Single On 5 |
使用单个地址5 |
On/Off |
MAC Info |
MAC地址设置信息(有线/Wi-Fi) |
- |
MAC Address(Wired) |
MAC地址(有线LAN) |
XX:XX:XX:XX:XX:XX |
MAC Address(Wireless) |
MAC地址(Wi-Fi) |
XX:XX:XX:XX:XX:XX |
Use MAC Address Filtering |
MAC地址筛选的操作状态 |
On/Off |
MAC Filtering Select |
MAC地址筛选方法 |
Disabled/Enabled |
MAC Filtering Permission Info |
MAC筛选许可信息 |
- |
MAC Address 1 |
MAC地址1 |
XX:XX:XX:XX:XX:XX |
MAC Address 2 |
MAC地址2 |
XX:XX:XX:XX:XX:XX |
MAC Address 3 |
MAC地址3 |
XX:XX:XX:XX:XX:XX |
MAC Address 4 |
MAC地址4 |
XX:XX:XX:XX:XX:XX |
MAC Address 5 |
MAC地址5 |
XX:XX:XX:XX:XX:XX |
LAN Setting |
基本设置信息 |
- |
MAC Info |
MAC地址设置信息(有线/Wi-Fi) |
- |
MAC Filtering Prohibit Info |
MAC筛选禁止信息 |
- |
MAC Address 1 |
MAC地址1 |
XX:XX:XX:XX:XX:XX |
MAC Address 2 |
MAC地址2 |
XX:XX:XX:XX:XX:XX |
MAC Address 3 |
MAC地址3 |
XX:XX:XX:XX:XX:XX |
MAC Address 4 |
MAC地址4 |
XX:XX:XX:XX:XX:XX |
MAC Address 5 |
MAC地址5 |
XX:XX:XX:XX:XX:XX |
Proxy Setting |
代理服务器设置信息 |
- |
Use Proxy |
使用代理服务器 |
On/Off |
Proxy Server Address |
代理服务器地址 |
XXXXXXXXXXXXXXXX(最多128个字符) |
Proxy Port Number |
代理端口指定 |
1到65535 |
Use User Authority Mode |
使用用户认证模式 |
On/Off |
Proxy Server User Name |
代理服务器用户名 |
XXXXXXXXXXXXXXXX(最多64个字符) |
Wireless LAN Setting |
Wi-Fi设置信息 |
- |
Channel |
通道(架构) |
XXX(0到255) |
SSID |
SSID |
Wi-Fi(架构)SSID(最多32个字符) |
Security Type |
Wi-Fi(架构)的安全类型 |
Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED |
WEP1 |
Wi-Fi(架构)WEP密钥1 |
XXXXXXXX(最多32个字符) |
WEP2 |
Wi-Fi(架构)WEP密钥2 |
XXXXXXXX(最多32个字符) |
WEP3 |
Wi-Fi(架构)WEP密钥3 |
XXXXXXXX(最多32个字符) |
WEP4 |
Wi-Fi(架构)WEP密钥4 |
XXXXXXXX(最多32个字符) |
WEP Certificate |
Wi-Fi(架构)的WEP证书 |
Open/Shared/Auto |
WEP Format |
Wi-Fi(架构)的WEP格式 |
Hex/String |
Direct Connection Setting |
无线直连设置信息 |
- |
Device Name |
无线直连设备名称 |
无线直连设备名称(最多32个字符) |
Channel |
通道(无线直连) |
XXX(0到255) |
SSID |
SSID |
无线直连网络名称(SSID)(最多32个字符) |
Security Type |
Wi-Fi(无线直连)的安全类型 |
Disabled/WPA2 PSK TKIP/WPA2 PSK AES |
WSD Setting |
WSD设置信息 |
- |
Use WSD |
使用WSD |
On/Off |
WSD Timeout |
超时 |
1/5/10/15/20[分钟] |
Use WSD Rx Optimization |
使用WSD接收优化 |
On/Off |
Protocol Setting |
协议设置信息 |
- |
Printer Name |
打印机名称 |
XXXXXXXX(最多16个字符) |
Use LPR |
使用LPR |
On/Off |
Use Wired DRX |
间歇接收(有线LAN) |
On/Off |
Use Wireless DRX |
间歇接收(Wi-Fi) |
On/Off |
Use RAW |
使用RAW |
On/Off |
Use LLMNR |
使用LLMNR |
On/Off |
Use Spanning Tree |
使用跨越树 |
On/Off |
Use Dedicated Port |
专用端口设置 |
On/Off |
SNMP Setting |
SNMP设置信息 |
- |
Use SNMPv1 |
使用SNMPv1 |
On/Off |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
SNMP Community Name1 |
SNMPv1共同体名称1 |
XXXXXXXX(最多32个字符) |
SNMP Community Name2 |
SNMPv1共同体名称2 |
XXXXXXXX(最多32个字符) |
SNMP Extra Access Authority |
SNMPv1附加访问权限 |
Disable/Read Only/Read Write |
SNMP Access Authority1 |
SNMPv1社区1/2访问权限 |
Disable/Read Only/Read Write |
SNMP Access Authority2 |
SNMPv1社区1/2访问权限 |
Disable/Read Only/Read Write |
SNMPv3 Setting |
SNMPv3设置信息 |
- |
User1 |
用户1 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
MIB Access Restriction |
MIB访问限制 |
Disable/Read Only/Read Write |
Security Setting |
安全设置 |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
认证算法 |
Null/MD5/SHA1 |
Encryption Algorithm |
加密算法 |
Null/AES/DES |
User2 |
用户2 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
MIB Access Restriction |
MIB访问限制 |
Disable/Read Only/Read Write |
Security Setting |
安全设置 |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
认证算法 |
Null/MD5/SHA1 |
Encryption Algorithm |
加密算法 |
Null/AES/DES |
User3 |
用户3 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
MIB Access Restriction |
MIB访问限制 |
Disable/Read Only/Read Write |
Security Setting |
安全设置 |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
认证算法 |
Null/MD5/SHA1 |
Encryption Algorithm |
加密算法 |
Null/AES/DES |
User4 |
用户4 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
MIB Access Restriction |
MIB访问限制 |
Disable/Read Only/Read Write |
Security Setting |
安全设置 |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
认证算法 |
Null/MD5/SHA1 |
Encryption Algorithm |
加密算法 |
Null/AES/DES |
User5 |
用户5 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Use SNMPv3 |
使用SNMPv3 |
On/Off |
MIB Access Restriction |
MIB访问限制 |
Disable/Read Only/Read Write |
Security Setting |
安全设置 |
No Auth No Priv/Auth No Priv/Auto Priv |
Authority Algorithm |
认证算法 |
Null/MD5/SHA1 |
Encryption Algorithm |
加密算法 |
Null/AES/DES |
Dynamic DNS Setting |
动态DNS设置 |
- |
IPv4 |
IPv4 |
- |
Use Dynamic DNS |
动态DNS的操作状态 |
On/Off |
Host Name |
主机名称 |
XXXXXXXX(最多64个字符) |
Domain Name |
域名 |
XXXXXXXX(最多254个字符) |
IPv6 |
IPv6 |
- |
Use Manual Address |
手动地址的DNS动态设置 |
On/Off |
Use Stateless Address |
无状态地址的DNS动态设置 |
On/Off |
Use Stateful Address |
有状态地址的DNS动态设置 |
On/Off |
Use Name As IPv4 |
使用与IPv4相同的主机名称/域名 |
On/Off |
Host Name |
主机名称 |
XXXXXXXX(最多64个字符) |
Domain Name |
域名 |
XXXXXXXX(最多254个字符) |
SNTP Setting |
SNTP设置信息 |
- |
Use SNTP |
使用SNTP |
On/Off |
SNTP Polling Interval |
SNTP轮询间隔 |
1至48 [小时] |
SNTP Server Name |
SNTP服务器名称 |
XXXXXXXX(最多256个字符) |
FTP Setting |
FTP设置信息 |
- |
Use FTP |
使用FTP |
On/Off |
Use FTP Authority |
使用FTP权限 |
On/Off |
FTP User Name |
FTP用户名 |
XXXXXXXX(最多33个字符) |
Bonjour Setting |
Bonjour设置信息 |
- |
Use Bonjour |
使用Bonjour |
On/Off |
Bonjour Service Name |
Bonjour服务名称 |
Bonjour服务名称(最多49个字母数字字符) |
DHCP option settings |
DHCP选项设置 |
- |
IPv4 |
IPv4 |
- |
Acquire host name |
获取主机名 |
On/Off |
DNS dynamic update |
DNS动态更新 |
On/Off |
Acquire Domain Name |
获取域名 |
On/Off |
IPv6 |
IPv6 |
- |
Acquire host name |
获取主机名 |
On/Off |
DNS dynamic update |
DNS动态更新 |
On/Off |
Acquire Domain Name |
获取域名 |
On/Off |
802.1X Setting |
802.1X设置信息 |
- |
Authority Type |
启用/禁用802.1X和权限类型 |
Do not use/EAP-TLS/EAP-TTLS/PEAP |
EAP TTLS Type |
EAP-TTLS内部权限类型 |
MSCHAPv2/PAP |
Weak Encryption Restriction |
弱加密限制 |
Do not restrict/Restrict |
Weak Certificate Restriction |
弱证书限制 |
Do not restrict/Restrict |
Login Name |
登录名 |
XXXXXXXX(最多97个字符) |
User Name |
用户名 |
XXXXXXXX(最多97个字符) |
Server Name |
服务器名称 |
XXXXXXXX(最多43个字符) |
Verify Authentication Server Name |
核对验证服务器名称 |
On/Off |
Verify Authentication Server Certificate |
核对验证服务器证书 |
On/Off |
IPsec Setting |
IPsec设置信息 |
- |
Use IPsec |
使用IPsec |
On/Off |
Phase2 Protocol |
IPsec phase2协议 |
AH/ESP/AH & ESP |
IPP Setting |
IPP确认设置 |
- |
Enable/disable IPP |
启用/禁用IPP |
Enable/Disable |
Secure print |
安全打印 |
Enable/Disable |
Use IPP Authority |
使用IPP权限 |
On/Off |
IPP User Setting |
IPP确认用户设置 |
- |
User1 |
用户1 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User2 |
用户2 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User3 |
用户3 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User4 |
用户4 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User5 |
用户5 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User6 |
用户6 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User7 |
用户7 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User8 |
用户8 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User9 |
用户9 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
User10 |
用户10 |
- |
User Name |
用户名 |
XXXXXXXX(最多32个字符) |
Email Setting |
电子邮件设置信息 |
- |
Retry Count |
电子邮件重试次数 |
0到5 |
Retry Interval |
电子邮件重试间隔 |
1到60(分钟) |
Use Email Notification |
使用电子邮件通知 |
On/Off |
Use SSL |
使用SSL |
On/Off |
Use SSL Cert No Check |
使用SSL证书 |
On/Off |
Use Mailbox Delete |
使用邮箱删除 |
On/Off |
SMTP Server Address |
SMTP服务器地址 |
XXXXXXXX(最多256个字符) |
SMTP Server Port No |
SMTP服务器端口号 |
0到65535 |
SMTP State |
SMTP状态 |
Invalid/Authorized/POP before SMTP |
From Address |
发送地址 |
XXXXXXXX(最多128个字符) |
To Address 1 |
接收地址1 |
XXXXXXXX(最多128个字符) |
Reply Address 1 |
回复地址1 |
XXXXXXXX(最多128个字符) |
Notice Conditions 1 |
通知条件1 |
- |
Job End |
作业结束 |
On/Off |
Error Occurred |
发生错误 |
On/Off |
Warning Occurred |
发生警告 |
On/Off |
Signature 1 |
署名1 |
XXXXXXXX(最多128个字符) |
To Address 2 |
接收地址2 |
XXXXXXXX(最多128个字符) |
Reply Address 2 |
回复地址2 |
XXXXXXXX(最多128个字符) |
Notice Conditions 2 |
通知条件2 |
- |
Job End |
作业结束 |
On/Off |
Error Occurred |
发生错误 |
On/Off |
Warning Occurred |
发生警告 |
On/Off |
Signature 2 |
署名2 |
XXXXXXXX(最多128个字符) |
RUI Setting |
远程用户界面设置信息 |
- |
Use RUI |
使用远程用户界面 |
On/Off |
(“XX”表示字母数字字符。)