LAN settings

Select this setting item from Device settings.

Important

• The administrator password is required to change settings if it is enabled for changing settings using the operation panel.

• Change LAN

  Enables either wireless LAN, wired LAN, or direct connection. You can also disable all.

• Wireless LAN setup

  Selects the setup method for wireless LAN connection.

  Note

  • You can also enter this setting menu by selecting LAN settings on the HOME screen. In this case, enable wireless LAN.

  • Cableless setup

    Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.

  • Standard setup

    Select when you perform settings for wireless LAN manually using the operation panel of the printer.

  • WPS (Push button method)

    Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.

  • Other setup

    • Advanced setup

      Select when you perform settings for wireless LAN manually. You can specify multiple WEP keys.

    • WPS (PIN code method)

      Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

• Confirm LAN settings

  The list of wireless/wired LAN settings or the direct connection of this printer is displayed on the touch screen.

  For more information on the printer's network setting is printed out:

  • Printing Network Settings

  Important

  • The network settings printout contains important information about your network. Handle it with care.

  • LAN setting list

    The list of wired LAN settings of this printer is displayed on the touch screen.

    The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)

    Items	Setting
    Connection	Active/Inactive
    IPv4 address	XXX. XXX. XXX. XXX (12 characters)
    IPv4 subnet mask	XXX. XXX. XXX. XXX (12 characters)
    IPv4 default gateway	XXX. XXX. XXX. XXX (12 characters)
    IPv4 DNS dynamic setting	Active/Inactive
    IPv4 DNS host name	XXXXXXXXXXXX
    IPv4 DNS domain name	XXXXXXXXXXXX
    IPv6 address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 subnet prefix length	XXX (up to 3 digits)
    IPv6 link-local address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 link-local prefix length	XXX (up to 3 digits)
    IPv6 manual address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 manual prefix length	XXX (up to 3 digits)
    IPv6 stateless address 1	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 1	XXX (up to 3 digits)
    IPv6 stateless address 2	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 2	XXX (up to 3 digits)
    IPv6 stateless address 3	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 3	XXX (up to 3 digits)
    IPv6 stateless address 4	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 4	XXX (up to 3 digits)
    IPv6 default gateway 1	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 2	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 3	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 4	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    DHCPv6	Active/Inactive
    DHCPv6 stateful address	XXXXXXXXXXXX
    DHCPv6 stateful prefix length	XXX (up to 3 digits)
    IPv6 primary DNS server address	XXXXXXXXXXXX
    IPv6 secondary DNS server add.	XXXXXXXXXXXX
    IPv6 DNS dyn. update: manual	Active/Inactive
    IPv6 DNS dyn. update: stateless	Active/Inactive
    IPv6 DNS dyn. update: stateful	Active/Inactive
    IPv6 Use IPv4 host/domain name	Active/Inactive
    IPv6 DNS host name	XXXXXXXXXXXX
    IPv6 DNS domain name	XXXXXXXXXXXX
    MAC address	XX:XX:XX:XX:XX:XX (12 characters)
    IPsec settings	Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
    Pre-shared key	XXXXXXXXXXXXXXXX (16 characters)
    Authentication	TLS/TTLS/PEAP/TTLS/PEAP/EAP-TTLS internal auth. method/MSCHAPv2/PAP/Do not use
    EAP-TTLS internal auth. method	MSCHAPv2/PAP
    Weak encryption restriction	Restrict/Do not restrict
    Weak certificate restriction	Restrict/Do not restrict
    Authentication server name	XXXXXXXXXXXX
    Client operation status	XXXXXXXXXXXX
    NTP/SNTP server address	XXXXXXXXXXXX
    Polling interval	XXXXXXXXXXXX
    Spanning tree setting	XXXXXXXXXXXX
    Printer name	XXXXXXXXXXXXXXX (up to 15 characters)
    Bonjour service name	XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters)
    Root cert. thumbprint (SHA-1)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    Root cert. thumbprint (SHA-256)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

    ("XX" represents alphanumeric characters.)

  • WLAN setting list

    The list of wireless LAN settings of this printer is displayed on the touch screen.

    The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)

    Items	Setting
    Connection	Active/Inactive
    SSID	XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX (up to 32 characters)
    Communication mode	Infrastructure
    Channel	XX (up to 2 digits)
    Wireless LAN security	Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)
    IPv4 address	XXX. XXX. XXX. XXX (12 characters)
    IPv4 subnet mask	XXX. XXX. XXX. XXX (12 characters)
    IPv4 default gateway	XXX. XXX. XXX. XXX (12 characters)
    IPv4 DNS dynamic setting	Active/Inactive
    IPv4 DNS host name	XXXXXXXXXXXX
    IPv4 DNS domain name	XXXXXXXXXXXX
    IPv6 address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 subnet prefix length	XXX (up to 3 digits)
    IPv6 link-local address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 link-local prefix length	XXX (up to 3 digits)
    IPv6 manual address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 manual prefix length	XXX (up to 3 digits)
    IPv6 stateless address 1	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 1	XXX (up to 3 digits)
    IPv6 stateless address 2	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 2	XXX (up to 3 digits)
    IPv6 stateless address 3	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 3	XXX (up to 3 digits)
    IPv6 stateless address 4	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 stateless prefix length 4	XXX (up to 3 digits)
    IPv6 default gateway 1	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 2	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 3	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway 4	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    DHCPv6	Active/Inactive
    DHCPv6 stateful address	XXXXXXXXXXXX
    DHCPv6 stateful prefix length	XXX (up to 3 digits)
    IPv6 primary DNS server address	XXXXXXXXXXXX
    IPv6 secondary DNS server add.	XXXXXXXXXXXX
    IPv6 DNS dyn. update: manual	Active/Inactive
    IPv6 DNS dyn. update: stateless	Active/Inactive
    IPv6 DNS dyn. update: stateful	Active/Inactive
    IPv6 Use IPv4 host/domain name	Active/Inactive
    IPv6 DNS host name	XXXXXXXXXXXX
    IPv6 DNS domain name	XXXXXXXXXXXX
    MAC address	XX:XX:XX:XX:XX:XX (12 characters)
    IPsec settings	Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
    Pre-shared key	XXXXXXXXXXXXXXXX (16 characters)
    Client operation status	XXXXXXXXXXXX
    NTP/SNTP server address	XXXXXXXXXXXX
    Polling interval	XXXXXXXXXXXX
    Printer name	XXXXXXXXXXXXXXX (up to 15 characters)
    Bonjour service name	XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters)
    Root cert. thumbprint (SHA-1)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    Root cert. thumbprint (SHA-256)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

    ("XX" represents alphanumeric characters.)

  • Direct connection setting list

    The list of direct connection settings of this printer is displayed on the touch screen.

    The following setting items are displayed. (Some setting items are not displayed depending on the printer settings.)

    Items	Setting
    Connection	Active/Inactive
    SSID	DIRECT-XXXX-XXXXXXseries
    Password	XXXXXXXXXX (10 characters)
    Communication mode	Direct connection
    Channel	3
    Wireless LAN security	WPA2-PSK(AES)
    IPv4 address	XXX. XXX. XXX. XXX (12 characters)
    IPv4 subnet mask	XXX. XXX. XXX. XXX (12 characters)
    IPv4 default gateway	XXX. XXX. XXX. XXX (12 characters)
    IPv4 DNS dynamic setting	Active/Inactive
    IPv4 DNS host name	XXXXXXXXXXXX
    IPv4 DNS domain name	XXXXXXXXXXXX
    IPv6 address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 default gateway	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 subnet prefix length	XXX (up to 3 digits)
    IPv6 link-local address	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters)
    IPv6 link-local prefix length	XXX (up to 3 digits)
    MAC address	XX:XX:XX:XX:XX:XX (12 characters)
    IPsec settings	Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
    Pre-shared key	XXXXXXXXXXXXXXXX (16 characters)
    Printer name	XXXXXXXXXXXXXXX (up to 15 characters)
    Bonjour service name	XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters)
    Direct connection device name	XXXXXX-XXXXXXseries
    Root cert. thumbprint (SHA-1)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    Root cert. thumbprint (SHA-256)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

    ("XX" represents alphanumeric characters.)

• Other settings

  Important

  • You cannot select the items below when Disable LAN is selected for Change LAN.

  • Set printer name

    Specifies the printer name. You can use up to 15 characters for the name.

    Note

    • You cannot use the same printer name as that already used for other LAN connected devices.
    • You cannot use a hyphen for the initial or last character of the printer name.

  • TCP/IP settings

    Performs IPv4 or IPv6 setting.

  • WSD setting

    Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista).

    • Enable/disable WSD

      Selects whether WSD is enabled or disabled.

      Note

      • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista.

    • Optimize inbound WSD

      Selecting Enable allows you to receive the WSD printing data faster.

    • Timeout setting

      Specifies the timeout length.

  • Bonjour settings

    Setting items when you use Bonjour.

    • Enable/disable Bonjour

      Selecting Enable allows you to use Bonjour to perform the network settings.

    • Service name

      Specifies the Bonjour service name. You can use up to 48 characters for the name.

      Note

      • You cannot use the same service name as that already used for other LAN connected devices.

  • IEEE802.1X settings

    Performs various settings for IEEE802.1.X.

  • SNTP settings

    Performs various settings for SNTP (Simple Network Time Protocol).

  • Spanning tree setting

    Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.

  • LPR protocol setting

    Enables/Disables the LPR setting.

  • RAW protocol

    Enables/Disables RAW printing.

  • LLMNR

    Enables/Disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the printer to detect printer's IP address from the printer name without a DNS server.

  • Wireless LAN DRX setting

    Selecting Enable allows you to activate discontinuous reception when using wireless LAN.

  • Wired LAN DRX setting

    Selecting Enable allows you to activate discontinuous reception when the printer is connected to a device compatible with wired LAN.

  • Direct connection settings

    Setting items are available when you connect a device to the printer.

    Important

    • You can select these setting items only when Activate direct connect. is selected for Change LAN.

    • Update SSID/password

    • Selecting Yes updates the identifier (SSID) and password for direct connection.

  • Direct connection device name

    Changes the printer's name displayed on a Wi-Fi Direct compatible device.

  • Connection request confirmation

    Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.

    • Connecting Smartphone/Tablet to Printer Directly via Wireless LAN (Direct Connection)

• Reset LAN settings

  Initializes the network settings on the printer.

  After resetting, perform setup again as necessary.