imagePROGRAF PRO-4100S
Highest Density Backlit Film
| Item | Description |
|---|---|
| Category | Sign |
| Operation Panel | HighDensityBacklit |
| Printer Driver | Highest Density Backlit Film |
| ICC Profile (Displayed Name) | Canon PRO-4100S/541S Highest Density Backlit Film -P |
| ICC Profile (File Name) | CN_PRO-4100S_541S_HighestDensityBacklitFilm-P.icc |
| Type of Black Ink | MBK |
| Execute Color Calibration | No |
| Tone Adjustment | Not possible |
| Factory Default | MCT |
| Display Region | JP,CK,OC,EMEA,AM,AS |
| Approximate Basis Weight (g/㎡) | 165 |
| Approximate Thickness (mm) | 0.13 |
Important
-
Ink will take longer to dry because this setting prints at high density.
Note the following:
-
Allow enough time for drying.
If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.
-
It is recommended to use the basket in Position 3.
The ink may stick to the basket if you use it in other positions.Refer to "Printing on Large-Format or Easily Damaged Paper (Position 3)" for details.
Note
- These are general-purpose paper settings.
- If you see uneven printing in the printed material, you can alleviate the problem by aligning the backlight.
- In environments that are exposed to water, after printing the document, laminate the document or perform other appropriate processing before you use it.
