Specifications
General Specifications
Interface |
USB Port: Hi-Speed USB * Network Port: Wired LAN: 100BASE-TX / 10BASE-T Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b / IEEE802.11a * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
USB and the network can be used at the same time. Wi-Fi and wired LAN cannot be used at the same time. |
---|---|
Operating environment |
Temperature: 41 to 95 °F (5 to 35 °C) Humidity: 10 to 90 % RH (no condensation) * The performance of the printer may be reduced under certain temperature and humidity conditions. Recommended conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 10 to 80 % RH (no condensation) * For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions. |
Storage environment |
Temperature: 32 to 104 °F (0 to 40 °C) Humidity: 5 to 95 % RH (no condensation) |
Power supply |
AC 100-240 V, 50/60 Hz (The supplied power cord is only for the country or region you purchased.) |
Power consumption |
Printing: 16 W or less *1 Standby (minimum): 1.0 W or less *1*2 Standby (all ports connected): 2.4 W or less OFF: 0.2 W or less *1 USB connection to a PC *2 The wait time for standby cannot be changed. |
External dimensions (W x D x H) |
Approx. 25.2 x 15 x 7.9 in. (Approx. 639 x 379 x 200 mm) * With the trays retracted. |
Weight |
Approx. 31.6 lb (Approx. 14.4 kg) * With the Print Head and ink tanks installed. |
Network Specifications
Communication protocol | SNMP, HTTP, TCP/IP (IPv4/IPv6) |
---|---|
Wired LAN |
Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transfer speed: 10 Mbps/100 Mbps (auto switching) Security: IEEE802.1X (EAP-TLS/EAP-TTLS/PEAP) |
Wi-Fi |
Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b / IEEE802.11a Frequency bandwidth: 2.4 GHz / 5 GHz Channel: 2.4 GHz: 1-11 or 1-13 5 GHz: W52, W53, W56, W58 * Wireless Direct cannot be used in the 5GHz band. * Frequency bandwidth and available channels differ depending on country or region. Communication distance: Indoors 164 feet/50 m * Effective range varies depending on the installation environment and location. Security: WEP (64/128 bits) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) Setup: WPS (Push button configuration/PIN code method) Easy wireless connect |
Minimum System Requirements
Conform to the operating system's requirements when higher than those given here.
Windows
Operating System |
Windows 10, Windows 8.1, Windows 7 SP1 Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later. Printer driver, IJ Printer Assistant Tool, and IJ Network Device Setup Utility support the following OS: Windows Server 2008 R2 SP1, Windows Server 2012 R2, Windows Server 2016, and Windows Server 2019. |
---|---|
Hard Disk Space |
2.0 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. |
macOS
Operating System | OS X 10.11.6, macOS 10.12 - macOS 10.15 |
---|---|
Hard Disk Space |
1.5 GB or more Note: For bundled software installation. The necessary amount of hard disk space may be changed without notice. |
Other Supported OS
iOS, Android, Chrome OS Some functions may not be available with the supported OS. Refer to the Canon web site for details. |
Mobile Printing Capability
Apple AirPrint |
PIXMA Cloud Link |
Mopria Print Service |
-
Internet connection or CD-ROM drive is required to install the software for Windows.
-
macOS: For macOS, an internet connection is required during software installation.
-
Internet connection is required to use all the user's guide.
Information in this manual is subject to change without notice.