skip to main Item

imagePROGRAF PRO-2100

Highest Density Backlit Film

  • Previous
  • Next
Item Description
Category Sign
Operation Panel HighDensityBacklit
Printer Driver Highest Density Backlit Film
ICC Profile (Displayed Name) Canon PRO-2100/521 Highest Density Backlit Film -P
ICC Profile (File Name) CN_PRO-2100_521_HighestDensityBacklitFilm-P.icc
Type of Black Ink MBK
Execute Color Calibration No
Tone Adjustment Not possible
Clear Coating Settings Auto Only
Factory Default MCT
Display Region JP,CK,OC,EMEA,AM,AS
Approximate Basis Weight (g/㎡) 165
Approximate Thickness (mm) 0.13

Important

  • Ink will take longer to dry because this setting prints at high density.

    Note the following:

  • Allow enough time for drying.

    If the ink has not dried sufficiently, ink may stick to surfaces or the printed surface may get scratched.

  • It is recommended to use the basket in Position 3.

    The ink may stick to the basket if you use it in other positions.Refer to "Printing on Large-Format or Easily Damaged Paper (Position 3)" for details.

Note

  • These are general-purpose paper settings.
  • If you see uneven printing in the printed material, you can alleviate the problem by aligning the backlight.
  • In environments that are exposed to water, after printing the document, laminate the document or perform other appropriate processing before you use it.