skip to main text

Updating Printer Firmware

Important

  • Make sure the printer is connected to Internet before updating printer firmware.

  • Do not turn off the printer while the update is in progress.

  • In the printer setup at the start of use, if you set Do you want to enable automatic firmware updates? to Enable (recommended), it will be automatically updated even if the administrator mode is enabled after that.

Updating Printer Firmware from Operation Panel

  1. Check that printer is turned on.

  2. Select Various settings on HOME screen.

  3. Select Printer settings.

  4. Select Firmware update.

    Note

    • If you specify the administrator password, enter the password.

  5. Select Install update.

  6. Check displayed message and select Yes.

  7. Check displayed message and select Start update.

    Update starts.

    Finishing update turns off the printer and it turns on again.

  8. Check displayed message and select OK.

Updating Printer Firmware from Remote UI

  1. Display printer status on web browser.

  2. Select Firmware update.

  3. Select Install update.

  4. Check displayed message and select Update.

    Update starts and returns to the menu screen when update is completed.