skip to main text

Reinstalling the Printer

Reinstalling Your printer

When the preparations to transport have been done and the printer was transferred, follow the procedure below.

Important

  • During reinstallation, a great amount of ink is consumed since ink is loaded into the printer or inside of print head. Additional new ink tanks or maintenance cartridges may be also necessary since a great amount of ink is ejected. Obtain ink tanks or maintenance cartridges before performing preparations. If a message prompting you to replace ink tanks or the maintenance cartridge is displayed, you cannot use the printer until you replace them with new ones.

  1. Take the printer out of the box.

    Important

    • When lifting the printer, lift it with two people from both sides.

    • Reinstall the printer on a flat place while paying attention to the ink supply stopper.

  2. Press the ON button to turn on the printer.

  3. Check the message, select Yes.

  4. When the message appears, open the tank cover, then install all removed ink tanks.

    After the tank cover is closed, the printer starts preparations to reinstall it. Wait for a while.

    Do not perform any other operations during this operation.

    The main menu will appear after preparations to reinstall the printer are complete.

    Important

    • If there is not enough ink in the ink tanks, a message prompting you to replace ink tanks is displayed. Follow the directions in the message to replace the ink tank and then press the Back button.

      We recommend storing the removed ink tanks since they may still be usable for normal printing.

    • If the maintenance cartridge does not have enough space, a message prompting you to replace the maintenance cartridge is displayed. Follow the directions in the message to replace the maintenance cartridge and then press the Back button.

      We recommend storing the removed maintenance cartridge since it may still be usable for normal printing.

    • Keep removed ink tanks in a bag to avoid staining of clothing or the surrounding area. Also, do not drop ink tanks or apply excessive pressure to them. Handle carefully.

    • During reinstallation preparation, always follow the precautions below. Otherwise, reinstallation preparation may be interrupted and started over again, causing the printer to consume more ink.

      • Do not unplug the printer to turn off the power.

      • Do not open the tank cover.

      • Do not open the maintenance cover.

      • Do not move or lift up the printer.