skip to main text

Setting Items for Photo Printing Using Operation Panel

You can specify the setting of page size, media type, photo fix and so on to print the photos saved on the memory card.

Print Settings Screen

How to display the print settings screen varies with the print menu.

  • In Photo print or Slide show:

    The following screen is displayed by tapping Settings.

    figure: Touch screen

    * In Slide show, the Print settings screen is displayed by tapping Print settings.

  • In Trimming print:

    The following screen is displayed before printing.

    figure: Touch screen

Setting Items

You can specify the following setting items.

Flick vertically to display setting items and tap the setting item to display the settings. Tap to specify the setting.

figure: Touch screen

Note

  • Depending on the print menu, some setting items cannot be selected. This section describes the setting items in Photo print.

    The setting item which cannot be selected is displayed grayed out or not displayed.

  • Some settings cannot be specified in combination with the other setting items or the print menus. If the setting which cannot be specified in combination is selected, and Error details are displayed on the touch screen. In this case, tap on the upper left on the touch screen to check the message and change the setting.

  • The settings of the page size, media type, etc. are retained even if another print menu is selected or the machine is turned off.

  1. Page size

    Select the page size of the loaded paper.

  2. Type (Media type)

    Select the media type of the loaded paper.

  3. Print qlty (Print quality)

    Select print quality according to the photo.

  4. Border (Bordered/Borderless print)

    Select bordered or borderless print.

  5. Photo fix

    When Auto photo fix is selected, the scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print.

    Note

    • As a default, photos on the memory card are printed with auto correction applied.

    • If No correction is selected, photos are printed without correction.

  6. Red-EyeCorrection

    Corrects red eyes in portraits caused by flash photography.

    Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.

  7. Print date

    Activates/deactivates to print the date (shooting date) on a photo.

    Note

    • The shooting date is printed according to the settings of Date display format in Device user settings under Device settings under Setup.

      Device user settings