skip to main text

Setting Items for Copying

You can change the copy settings such as magnification and intensity.

Print Settings Screen


  • For more on the print setting screen or the setting item for Photo copy, see Copying Photos.

How to display the print setting screen varies with the copy menu.

  • In Copy:

    The following screen is displayed by tapping Settings on the Copy standby screen.

    figure: Touch screen
  • In Borderless copy or Frame erase copy:

    The following screen is displayed before copying.

    figure: Touch screen

Setting Items

You can specify the following setting items.

Flick to display setting items and tap the setting item to display the settings. Tap to specify the setting.

figure: Touch screen


  • Depending on the copy menu, some setting items cannot be selected. This section describes the setting items in Copy.

    The setting item which cannot be selected is displayed grayed out.

    For more on the setting items for Photo copy, see Copying Photos.

  • Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, and Error details are displayed on the touch screen. In this case, tap on the upper left on the touch screen to check the message and change the setting.

  • The settings of the page size, media type, etc. are retained even if the machine is turned off.

  • When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the touch screen. Change the setting, following the on-screen instructions.

  1. Magnif. (Magnification)

    Specify the reduction/enlargement method.

    Reducing/Enlarging Copies

  2. Intensity

    Specify the intensity.

    figure: Touch screen
    1. Tap to activate/deactivate automatic intensity adjustment.

      When ON is selected, the intensity is adjusted automatically according to the originals loaded on the platen glass.

    2. Drag to specify the intensity.

    3. Tap to check the intensity setting.

  3. Page size

    Select the page size of the loaded paper.

  4. Type (Media type)

    Select the media type of the loaded paper.

  5. Print qlty (Print quality)

    Adjust print quality according to the original.


    • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.

    • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

  6. Layout

    Select the layout.

    Copying Two Pages onto Single Page

    Copying Four Pages onto Single Page

  7. 2-sidedPrintSetting

    Select whether to perform two-sided copying.

    Two-Sided Copying