skip to main text

Copying Originals

This section describes how to load originals and copy them to plain paper.

  1. Pull out the cassette 2 from the machine.

  2. Load the paper stack WITH THE PRINT SIDE FACING DOWN.

  3. Align the paper guides with the paper length and width.

  4. Insert the cassette 2 into the machine.

    After inserting the cassette into the machine, the paper information registration screen for the cassette is displayed on the touch screen.

  5. Select the size and type of the loaded paper in the cassette 2 at Page size and Type, then tap Register.

    If a message is displayed on the screen, follow the directions in the message to complete registration.

  6. Open the paper output tray (A).

  7. Extend the paper output support (B).

  8. Touch the HOME button (C).

  9. Tap Copy (D).

  10. Open the document cover (E).

  11. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (F).

  12. Close the document cover.

  13. Confirm the paper settings, then touch the Black button or Color button (G).

Important

  • Do not open the document cover until copying is complete.

Note

  • Your machine is equipped with many other convenient copy features.