Cannot Find Machine During Wireless LAN Setup: Check 3
Is machine connected to wireless router?
Use the icon on the touch screen to make sure the machine is connected to the wireless router.
If 
icon is displayed:
Make sure the wireless router you are using is configured to use 2.4 GHz bandwidth.
For more on checking the setting of the wireless router, refer to the instruction manual supplied with the wireless router or contact its manufacturer.
After checking the wireless router setting, make sure the machine is not placed far away from the wireless router.
The machine can be up to 50 m (164 ft) from the wireless router indoors. Make sure the machine is close enough to the wireless router to be used.
In addition, check where the machine and the wireless router are located and take the appropriate action.
-
Check for obstructions between the machine and the wireless router.
Wireless communication between different rooms or floors is generally poor. Adjust the location of the machine and the wireless router.
-
Make sure there is no source of radio wave interference near the machine or the wireless router.
If a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router is nearby, it may cause interference. Place the machine or the wireless router as far away from the interference source as possible.
After taking measures above, click Redetect on the Check Printer Settings screen to redetect the machine.
If the machine is found, follow the instructions on the screen to continue to set up network communication.
If the machine cannot be detected, the machine is not connected to the wireless router. Connect the machine to the wireless router.
After connecting the machine to the wireless router, click Back to Top on the Check Printer Settings to set up the network communication from the beginning.
icon is displayed:
