skip to main text

Transporting Your Printer

When relocating the machine for changing your living place or repairing it, make sure of the following.

Important

  • Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
  • With the print head and ink tank left installed in the machine, press the ON button to turn off the power. This allows the machine to automatically cap the print head, thus preventing it from drying.
  • After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so may cause the ink to leak during transport and cause damage to the machine.

  • When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

  1. Turn the machine off.

  2. Confirm that the POWER lamp is off and unplug the power cord.

    Important

    • Do not unplug the machine while the POWER lamp is lit or flashing, as it may cause malfunction or damage to the machine, making the machine unable to print.

  3. Retract the paper output support, then close the paper output tray.

  4. Retract the output tray extension and the paper support, then close the front cover.

  5. Unplug the printer cable from the computer and from the machine, then unplug the power cord from the machine.

  6. Use adhesive tape to secure all the covers on the machine to keep them from opening during transportation. Then pack the machine in the plastic bag.

  7. Attach the protective material to the machine when packing the machine in the box.